User Manual

3.4 Fieldbus Type Address Map
105
(2) List for Input and Output Signal
(ON = Applicable bit is “1”, OFF = Applicable bit is “0”)
Signal Type Bit Symbol Description Details
b15 MON
Operation control with communication is available
while it is ON
–
b14 – Cannot be used. –
b13 RTE
Retained condition of ERR-T or ERR-C during an
operation is cancelled if it is ON
It is the cancel signal when ERR-T or ERR-C
occurrence is set to latch in Gateway Parameter
Setting Tool
–
b12
b11
b10
b9
b8
b7
b6
b5
b4
b3
b2
b1
Control
signal 0
b0
– Cannot be used. –
b15
b14
b13
b12
b11
b10
b9
b8
b7
b6
b5
b4
b3
b2
b1
PLC Output
Control
signal 1
b0
– Cannot be used. –