User Manual

(2) Delete:

The Delete operation procedure is explained below. The data of any position number is deleted.

In this example, the data of position number 2 is deleted.

The position data table becomes as shown below.

No. Position Speed ACC • DEC Push % Range ACC MAX ABS/INC

0 0.00 125 mm/s 0.20 G 0% 0.10mm 0 0

1 50.00 100 mm/s 0.10 G 0% 0.20mm 1 0

2 * * mm/s * G * % * mm * 0

3 80.00 100 mm/s 0.10 G 40% 5.00mm 0 0

4 10.00 20 mm/s 0.20 G 0% 0.10mm 0 1

No. Position Speed ACC • DEC Push % Range ACC MAX ABS/INC

0 0.00 125 mm/s 0.20 G 0% 0.10mm 0 0

1 50.00 100 mm/s 0.10 G 0% 0.20mm 1 0

2 80.00 100 mm/s 0.10 G 40% 5.00mm 0 0

3 10.00 20 mm/s 0.20 G 0% 0.10mm 0 1

Mode Select A. 00

* Edit/Teach

In the Mode Select Screen, using the

Keys,

select Edit/Teach and then, press the Return Key.

Edit/Teach A. 00

* Delete

In the Edit/Teach screen, using the

Keys,

select Add and then, press the Return Key.

Delete? No. 2 A. 00

* Y Æ 1 N Æ 0

Using the Keys, change the position number into 2.

Pressing 1 on the Numeric Key will delete position

number 2 and then, the screen will return to the

Edit/Teach Screen. To cancel, press 0.

In either case, the screen will return to the previous

screen.

Edit/Teach A. 00

* Delete

Mode Select A. 00

* Edit/Teach

Press the ESC Key once to return the screen back to

Mode Select Screen.