Manual

7. Installation and Storage/Preservation Environment

7.1 Installation Environment

Do not use this product in the following environment

It is generally the environment where a worker can work without any protection gear.

Also make sure to keep enough work space necessary for maintenance.

• Location exposed to radiant heat from a huge heat source such as the heat treatment

• Location where the surrounding air temperature exceeds the range of 0 to 40qC

• Location where condensation occurs due to abrupt temperature changes

• Location where relative humidity exceeds 85%RH

• Location exposed to direct sunlight

• Location exposed to corrosive gases or combustible gases

• Location exposed to significant amount of dust, salt or iron powder (Outside of ordinary assembly

plant)

• Location where water, oil (includes oil mist and cutting fluid) or chemical is splashed

• Location where the product main body receives vibration or hit impact

When using the product in any of the locations specified below, provide a sufficient shield.

• Location subject to electrostatic noise

• Location where exposed to the influence of strong electric or magnetic field

• Location where exposed to the influence of ultraviolet or radiant rays

Open space required for maintenance inspection

Ɣ Motor coupling types

250mm or more

Ɣ Motor reversing types

250mm or more

300mm or more