User Manual

10. Maintenance Inspection

10.1 Inspection Items and Schedule

Follow the maintenance inspection schedule below.

It is assumed that the equipment is operating 8 hours per day.

If the equipment is running continuously night and day or otherwise running at a high operating rate, inspect more

often as needed.

External visual

inspection

Greasing

Start of work inspection

�

1-month inspection

�

3-month inspection

�

6-month inspection

�

� (Rod sliding surface)

Every 6-month since

�

� (Rod sliding surface)

10.2 External Visual Inspection

An external visual inspection should check the following things.

Main unit Loose actuator mounting bolts, other loose items

Rod Lubrication, dust, foreign object on sliding surfaces

Cables Scratches, proper connections

Overall Irregular noise, vibration

10.3 Cleaning

� Clean exterior surfaces as necessary.

� Use a soft cloth to wipe away dirt and buildup.

� Do not blow too hard with compressed air as it may cause dust to get in through the gaps.

� Do not use oil-based solvents as they can harm lacquered and painted surfaces.

� To remove severe buildup, wipe gently with a soft cloth soaked in a neutral detergent or alcohol.