Manual

2. Installation
28
2.3.3 Attachment of Transported Objects
y Attach a transported item on the threaded area on the tip of the rod. Keep in mind of the
incomplete thread.
y When tightening, hold two faces with an open-end wrench so torque would not be applied on
the rod. Applying excessive torque to the rod may damage the components inside.
y The material of the rod is aluminum. Tighten the Enclosed nut with the Recommended
tightening torque described below. Excessive tightening torque may damage the threaded area.
W
A
B
M
φ
D
Width across flats
Dimensions for Attachment of Transported Objects
Type
M
Screw nominal
diameter
A
B
Effective thread
depth
ID
Rod diameter
W
Width across flats
RA1L M4 10 8 6 5.5
RA2L M5 12 10 8 7
RA3L M6 14 12 10 8
Enclosed Nut Recommended Tightening Torque
Type Enclosed nut Recommended tightening torque
RA1L M4 nut (class 1)
0.75N㨯m
RA2L M5 nut (class 1)
1.5N㨯m
RA3L M6 nut (class 1)
2.6N㨯m