Manual

1. Preparation Before Use
2
1.2 Operating Environment
You need the following environment to run this software.
Model number Supported operating systems
RCM-101-MW Windows 2000 SP4 or later, Windows XP SP2 or
later
*1
, Windows Vista
*2
, Windows 7
*2
RCM-101-USB Windows 2000 SP4 or later, Windows XP SP2 or
later
*1
, Windows Vista
*2
, Windows 7
*2
Applicable operating systems
*1 Supported by software version V7.00.00.00 or later
*2 Supported by software version V9.00.00.00 or later
Applicable for 32 bit and 64 bit versions of the OS.
Computer Personal computer running an applicable operating system (Windows)
Keyboard Keyboard compatible with a personal computer running an applicable
operating system (Windows)
Memory Enough memory needed to run an applicable operating system
(Windows)
Display XGA or higher
Pointing device Mouse and other compatible driver
Memory-medium reading drive CD-ROM drive
Hard disk Hard disk with at least 20 MB of free space
(This software must be installed on the hard disk.)
Serial port
RS232C
(compatible with EIA-S74)
An applicable serial port is required if the model number of your PC
software is as follows:
Model number: RCM-101-MW
USB port An applicable serial port is required if the model number of your PC
software is as follows:
Model number: RCM-101-USB