Manual

11. Smart Tuning Function (Version V8.03.00.00 or Later)
133
[4] Click Load Setting button at the setting display of the actuator applicable for velocity and
acceleration/deceleration settings.

Fig. 11.22 Box to show carrier load setting for velocity and acceleration/deceleration settings
[5] Set the carrier load in “Load setting for Vel and Acc setting” window.
Click OK button.


Fig. 11.23 Carrier load setting for Smart tuning function Window
[6] Set the position and velocity in the blank position numbers.
(Note) In the position numbers with data already set, this function cannot be used.
Fig. 11.24 Edit position data Window

(Note) The value set to the cells that is to be set automatically with this function, such as the velocity cell,
can also be overwritten.
Load Setting Button
[1] Load Setting
[2]
OK
Button
[3]
Cancel
Button
Position and
velocity setting cell
Acceleration and
deceleration
setting cell
Carrier load setting cell
Position data input area