Instruction Manual

49
10. Maintenance/Inspection
10.2 Visual Inspection of the Exterior
In the visual inspection of the exterior, check the following items.
Actuator Loosening of actuator mounting bolts, etc.
Cables Scratches, proper connection of connectors
Overall Noise, vibration
10.3 Exterior Cleaning
x Clean the exterior of the actuator as necessary.
x Use a soft cloth, etc., to wipe off dirt.
x Do not blow compressed air onto the actuator too strongly, in order to prevent dust from entering the
actuator through small openings and gaps.
x Do not use petroleum solvent as it may damage the resin parts and coated surfaces.
x To clean stubborn soiling, moisten a soft cloth, etc., with neutral detergent and wipe gently.
10.4 Greasing the Gear
(1) Applicable grease
The following gear grease has been applied to the gear before shipment.
Kyodo Yushi AC-D NO.2
During maintenance, use lithium grease No. 2. The recommended products are listed below.
Showa Shell Sekiyu Albania Grease No. 2
Exxon Mobile Mobilux 2