Instruction Manual

66
6SHFL¿FDWLRQV
11.4 Options
11.4.1 Shaft Adapters
These shaft-shaped adapters are used to install a jig, etc., to the rotating part.
Drawing based on combination of
RCP2-RTBS/RTBSL
Drawing based on combination of
RCP2-RTB/RTBL
Drawing based on combination of
RCP2-RTBB
/
RTBBL
Drawing based on combination of
RCP2-RTCS
/
RTCSL
Drawing based on combination of
RCP2-RTC
/
RTCL
Drawing based on combination of
RCP2-RTCB
/
RTCBL
Unit model: RCP2-SA-RTS
(Unit weight: 0.02 kg)
Unit model: RCP2-SA-RT
(Unit weight: 0.04 kg)
Unit model: RCP2-SA-RTB
(Unit weight: 0.2 kg)
Unit model: RCP2-SA-RTS
(Unit weight: 0.02 kg)
Unit model: RCP2-SA-RT
(Unit weight: 0.04 kg)
Unit model: RCP2-SA-RTB
(Unit weight: 0.2 kg)
4-M3, depth 7
4-M4, depth 7
4-M5, depth 8.6
RTBS/RTBSL/RTCS/RTCSL shaft RTB/RTBL/RTC/RTCL shaft
6, counterbore depth 3.3
(5 holes are equally distributed)
6, counterbore depth 3.3
7.5, counterbore depth 4.5
R0.2 or less
R0.2 or less
through
depth 4
depth 3
Depth5
RTBB/RTBBL/RTCB/RTCBL shaft