Owner's manual

31
4. Installation Method
[RCP2-GRST]
The actuator is structured in such a way that it can be secured on one of its three sides.
Warning Caution
 Some of the tapped holes used for installing the gripper are through holes. Therefore, never use long
screws exceeding the effective thread length. They may damage the mechanical or electrical parts
inside the gripper.
depth 6
(Same on back side)
depth 3
(Same on back side)
Installation
surface
depth 3
Installation
surface
Installation
surface
(Same on back side)
depth 5
depth 3
depth 3
Stroke
Rear
3
3