Owner's manual

4. Installation Method

[RCP2-GR3SM]

Warning Caution

 Some of the tapped holes used for installing the gripper are through holes. Therefore, never use long

screws exceeding the effective thread length. They may damage the mechanical or electrical parts

inside the gripper.

(Note) If the gripper is installed

from the rear side, remove

the blank plugs from the

tapped holes.

depth 3

depth 㸱

Installation surface

(Same on back

side)

(Same on back

side)

(Same on back side)

Rear

(Use holes in the flange)

Detail view of A (2:1)

(Effective depth 7)

Blank plug (Set screw

M5 x 6)

depth 12

Installation

surface



4-5.5



2-3

