Manual

44
5. Installation
(4) Using tapped holes on datum surface
[A] Applicable models: RA2C, RA3C, RA4C, RA6C, RA3R, RA4R, RA6R, RA10C types
(Not applicable to guide types)
The thread depths of mounting holes provided in the respective actuators are shown below.
Model Tapped hole size Effective thread depth
mm63MC2AR
RA3C, RA3R M4 10 mm
RA4C, RA4R M6 12 mm
RA6C, RA6R M8 15 mm
(RCP2W-RA4C) M8 12 mm
RA8C, RA8R M8 16 mm
Tapped mounting holes are provided
on the datum surface. Install the
actuator using these tapped holes.
RA10C M10 18 mm