Owner manual

47
13. Maintenance and Inspection
13.9 Replacement of Belt and Motor for Reversing Type (Pulse Motor: RCP3)
[Items required for replacement]
 Replacement motor unit of reversing type
Model number
Without brake With brake
RCP3-MU00B RCP3-MU00B-B
 Belt
Manufacturer: Mitsuboshi Belting Ltd.
Belt model number (type)
40S2M104G (clean rubber type)
 Tension gauge
 Hex wrench set
[Procedure]
[1] Remove the pulley cover.
Remove the mounting screws (2 pcs).
[2] Loosen the tension adjustment bolts (2 pcs) and slack the belt.
Mounting screw
Nominal thread size Applicable Allen wrench
M3 2.5 mm across flats
Tension adjustment bolt
Nominal thread size Applicable hex wrench
M3 2.5 mm across flats