Manual

209
11. Maintenance and Inspection
197
22) Install the motor rear cover of the replacement motor.
23) Use an Allen wench of 2 mm across flats to tighten the motor end cap bolts.
Use a screwdriver to tighten the ground terminal bolt.
24) Use an Allen wench of 2 mm across flats to tighten the screws and install the cover.
Tightening Torque
Ground terminal bolt
Motor end cap bolts
Motor end cap bolt
Tightening torque: 83 N�cm
(
8.47 k
g
f�cm
)
Cover mounting bolts