User Manual

321

Part 2 Startup Chapter Chapter 5 Network Setup

319

Part 2 Startu

Cha

(5) Transferring the Settings

Bring the PLC connection online and transfer the settings.

If the CX-Programmer and other connections are online, bring them offline or terminate the connections.

When the settings have been successfully transferred, a remote I/O communication will start automatically.

[1] Transferring the settings to the PLC

x Select [Network] from the menu bar, and then select [Automatic Online Connection].

x Select “Serial Connection” in the [Direct Connection] screen.

x Select the COM port number to which the PLC is connected in the “PC serial port” field.

x Click [Connect].

* If multiple “PC serial ports” exist, open Window’s Device Manager, and select the same port as the “COM port

number” described under “Ports (COM & LPT).”

x Right-click [DeviceNet] in the “Online Connection Information window” and select [Connect].

x Select [DeviceNet] in the [Network Selection] dialog box, and click [OK].

-345-