Instruction Manual

Change History
318
Modbus
Change History
Revision Date Description of Revision
May 2010 Released Rev. 4.
x Added “Safety Guide.”
x Added SCON-CA to the supported models.
(Added the load cell calibration command, complete and measurement read
commands and registers.)
x Readjusted the specification of query 06.
x Readjusted the specification of query 10.
October 2011 Released Rev. 5.
x SCON-CA added to applicable models
(Load cell calibration command, complete, calculated value reading command
and register added)
December 2012 Released Rev. 6.
x ERC3, PCON-CA/CFA added to applicable models
(Maintenance information reading command and register added)