User guide

Page 241
*Supplement
2. Power Required by the Super SEL Controller (Manual display & method of calculation)
Power values written in the manual indicate rated power (effective power).
The required power is calculated based on the power consumption below.
• AC Specifications
Power Consumption
Controller 50W at maximum standard (without I/O expansion)
100W at maximum with I/O expansion
AC Motor Axis output 60W type 75W at rated output
Axis output 100W type 125W at rated output
Axis output 200W type 250W at rated output
Axis output 400W type 500W at rated output
[Example] : For a controller with 60w + 100w specifications, (standard)
50 + (75 + 125) = 250W
A
The calculated value is the required effective power when each axis is used at rated power.
B
The required power is calculated based on the power consumption below.
• DC Specifications
Power Consumption
Controller 50W at maximum standard (without I/O expansion)
100W at maximum with I/O Expansion
DC Motor Axis output 20W type 60W at rated output
Axis output 30W type 60W at rated output
Axis output 35W type 60W at rated output
Axis output 60W type 110W at rated output
Axis output 100W type 160W at rated output
Axis output 200W type 270W at rated output
[Example] : For a controller with 60w + 100w specifications, (standard)
50 + (110 + 160) = 320W
A
The calculated value is the required effective power when each axis is used at rated power.
B