User's Guide

Wireless Repeater 1200M-ZJQ User Guide
17
Step7 Click [Apply] to complete the setting. Wait for the repeater application to take effect. If
the Repeater LED light on, it means the extend is successful.
Complete Exit the browser, reconnect the wireless name of the repeater, enter the wireless
password, and you can go online.
⚫ If you need to set up the repeater again, you can reset the repeater to the factory
setting, and then configure it according to the first configuration method.
3.2 Log in to the repeater management page
If it is the first time to use the repeater or the repeater has been restored to its factory settings,
please refer to "3.1 First Repeater Settings"; otherwise, please refer to the following steps to log in
to the repeater.
Step1 When the repeater is operating normally, use a computer to search for and connect to
the repeater’s WiFi：XY1200AC_XXXX or XY1200AC_5G_XXXX。