Instruction Manual

Charger Station Set Up
The Charge Station is designed for plug and play functionality.
Remove the Charge Station from the box, remove the packing material, and determine
a suitable location for the station.
Optimal positioning requires a readily accessible, dedicated 110v AC power outlet.
(We offer different power capabilities, so please ensure that you have the proper
power supply for use).
To prevent tipping, mount or anchor the Charge Station to the ground (mounting
and anchoring supplies not included).
Prior to mounting or anchoring, position the station so that the individual ports are
facing away from the wall for ease of view and access to the Jump Ringz while charging.
Charging
After unpacking your new Jump Ringz, it is highly recommended that you fully charge
their batteries on the Charge Station prior to use. Please secure each Jump Ringz band
to the dock. Align the Jump Ringz so that the contact point on the band's rear aligns
with the charging pins on the Charge Station. Once docked to a powered Charge
Station, the Jump Ringz will illuminate red to indicate they are charging.
Once fully charged, the red light will automatically shut off.