Operation Manual

iAUDIO 5
22
iAUDIO 5
23
Line-in Recorder (Direct Encoding)
We will describe the example of direct encoding between CDP and iAUDIO5.
Turn on iAUDIO and press the MODE button. Then select Line-in Recorder from
the menu. Navigate with the + and – buttons and press the MENU button to enter
the Line-in Recorder mode.
Connect the headphone jack of CDP with the Line-in jack of iAUDIO with a
bi-directional stereo jack cable.
Press the REC button to switch iAUDIO to recording standby status. The memory
usage icon blinks but the timer does not increase, which indicates that iAUDIO is
not recording, but in on recording standby.
When you press the PLAY button of CDP, iAUDIO detects signals coming in
through the Line-in jack and starts recording.
The file is recorded as L***.MP3 in the
『Line-in』 folder under the
『RECORDS』. (“***” represents a 3-digit consecutive number.)
For information on changing the recording quality, see page 32 of this manual.
After recording, you can press and hold the Menu button to enter Navigator mode
for more convenient features.
• Play now: Plays the track immediately.
• Add to List: Adds the track to Dynamic Playlist.
• Intro: Plays only the intro part of the tracks.
• Delete: Completely removes the track from Flash memory.
To play recorded files more conveniently using Fast Forward and Fast Rewind
features, change to MP3 Player mode, and select L***.MP3 files to play in the
『Line-in』 folder under the 『Records』folder.
Simple Operations by Mode
Line-in Recorder Mode
Simple Operations by Mode
Line-in Recorder Mode