User's Guide

iAUDIO 10

1. Use the USB cable to connect iAUDIO 10 to the PC.

2. Tap the Touchpad and choose CHARGE + SYNC.

Choose CHARGE + PLAY for charge/play mode. This mode

disables the USB connection to the PC.

3. Also make sure to check My Computer or Windows

Explorer to see if iAUDIO 10 is properly connected

to the PC.

4. Copy desired video, music, or other les to iAUDIO 10.

5. When done, click the icon on the system tray to

safely remove iAUDIO 10 from the PC.

6. Click the popup message.

7. Safely remove the hardware and disconnect the

USB cable.

- This device can recognize up to 12,000 folders,

and up to 12,000 les (up to 8,000 music/video les and

up to 4,000 les of other supported formats).

- Disconnect the product after performing “Safely Remove

Hardware” function.

- The following message may appear randomly, but it does

not indicate that the product is malfunctioning. Please

try again.

- If your operating system does not display the ‘Safe To

Remove Hardware’ window, disconnect the player after all

transfer operations are completed.

- Only simple le transfer operation is available for Linux

and Mac OS.

+ Connecting and Disconnecting the PC

Before you start!