iBaby Monitor Model: M2 Pro User Manual 1
Index 1 Introduction..............................................................................................................................3 1.1 The package contents ................................................................................................3 1.2 Function and Features ...............................................................................................3 1.3 Product Specification ............................................................................................
1 Introduction The iBaby monitor works with your iPod touch, iPhone or iPad so you can see and hear your baby anytime, anywhere as long as you are connected to the internet (including Wi-Fi, 3G/4G network, etc.). From your free app, you set motion/sound alerts, zoom in and snap photos so you never miss an important moment. "This product is meant for providing convenience for baby monitoring. The manufacturer is not responsible for any legal liability caused by negligence. " 1.
1.3 Product Specification Model:M2 Pro P2P Support P2P Monitor automatically get the IOS device is Features WIFI setting currently connected Wi-Fi account and password Cloud Storage Support the pictures stored in the cloud OS Embedded Linux OS CPU 32Bit RSIC Embedded Processor Compression H.264 baseline Frame rate Max.30fps Resolution HD(1280*720),VGA(640*480) CPU Video Brightness, contrast, resolution is adjustable, Image Rotation Mirror /Flip Lens f=4.2mm, F=2.
User Access Support 4 users visiting on the same time TCP/IP ， HTTP ， UDP ， DHCP ， Protocol UPNP,NTP,P2P WIFI IP address DHCP IP address Protocol Support 802.11b/g/n Encryption Support WPA/WPA2 encryption Monitor automatically get the IOS device is Setting currently connected Wi-Fi account and password Other USB interface Connect with IOS devices antenna port Built-in antenna Shape material Plastic Work environment Indoors Power DC5V 2A Reset One Product power Daytime 2.
Monitor size: 132*142*110MM Size Package size: 165*165*165MM Weight Weight ： 280g Power Adapter , Quick start guide Package contents Warranty card , Magnetic base Software IOS8.0 or later App is free to download from App Store Certification Certification FCC CE ROSH 2 Appearance and interface 2.
device is searching for network. You can visit it via the iBaby Care app on your iPod Touch, iPhone or iPad. 2.
3 Set-up and Installation From the App Store, download “iBaby Care App” on to your supported mobile device Plug the power adapter into the camera and into an electrical outlet The camera will take a minute to power on. Wait for the tone before proceeding Connect the USB cable from your mobile device to the camera The message “Share Wi-Fi Settings” will appear.
4 FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
