"This product is meant for providing convenience for baby monitoring. The manufacturer is not responsible for any legal liability caused by negligence.
iBaby Monitor User Manual Index 1 2 3 4 5 INTRODUCTION ...........................................................................................................................4 1.1 THE PACKAGE CONTENTS .........................................................................................................4 1.2 FUNCTION AND FEATURES ........................................................................................................4 1.3 PRODUCT SPECIFICATION ...............................
iBaby Monitor User Manual 5.4.1 Device Information ............................................................................................................23 5.4.2 Time Setting .......................................................................................................................23 5.4.3 Firmware upgrade .............................................................................................................24 5.4.4 Restore Factory Default.....................................
iBaby Monitor User Manual 1 Introduction The iBaby monitor combines a high quality digital video camera with network connectivity and a powerful web server to bring clear video to your iPod Touch, iPhone and iPad, or a PC from anywhere on your local network or over the Internet. 1.1 The package contents 9 Camera * 1 9 User Manual & Utility CD *1 9 Power Adapter *1 9 Bracket * 1 9 Cable * 1 9 Antenna * 1 9 Quick Installation Guide *1 9 Screw *1 set 1.2 Function and Features 9 Support 802.
iBaby Monitor User Manual 1.3 Product Specification Item Image Capture Pan/Tilt Assistant Video and Audio Network Other Features Hardware Interface Physical Index Sub Item Description Sensor CMOS sensor Total of pixel 300k Minimum illumination 0 Lux(IR on automatically) Lens f=3.6mm, F=2.
iBaby Monitor User Manual Software(iPod Touch , iPhone and iPad) Power DC 5V Power consumption <6W Operating temperature 0℃~ 40℃ Operating humidity 10% ~ 80% non-condensing iOS 4.0 or later App is free to download from App Store OS Supported Microsoft Windows 98/2000/XP/Vista/Win 7 etc. Mac OS Browser Internet Explorer6.0 or higher, or Compatible Browser, Firefox, Safari etc. Application Software IPCMonitor.exe Software(PC) 2 Appearance and interface 2.
iBaby Monitor User Manual 2.2 Interface of the camera Figure 2 1) Power Input Socket: Connect Power adaptor, the adaptor‘s output is 5V 1.5A. 2) RESET Button: Press the RESET button and hold on more than 10 seconds, the camera will restart and recover to the factory default settings. 3) WIFI Antenna Connector: Install the WIFI antenna. 4) RJ45 Ethernet Socket: RJ45 Ethernet socket is 10/100M self-adjust. 5) Audio Input Socket: Audio input socket is designed for connecting external microphone.
iBaby Monitor User Manual Figure 4 3.2 Visit camera with a iPod Touch, iPhone and iPad Prior to using you must first install the iBaby Monitor App from the App Store. THIS IS A FREE DOWNLOAD. Please confirm the iOS is V4.0 or later. If not, update your iOS before using this product. If you have not install that, please launch the App Store, and search using the keyword “iBaby Monitor”, be sure your web function is enabled. .
iBaby Monitor User Manual Figure 5 Operation Steps: 1) Click “Search (F3) 2) Choose the device 3) Change the ip address of the camera according to the information in the red frame on the left. The numbers in the red circle should not be the same. 4) Put the user name and password into “Authentication” (By default, the user name is: admin, password is: 123456). 5) Click “Update” 6) After successfully update, click “Search (F3)”, choose the device and click “Browse (F4)”.
iBaby Monitor User Manual Figure 6 3.4 Visit Camera from a PC We suggest using IE kernel browser to view the video (it can provide more functions), but user need to install Player before viewing the video. Click “download and install player (first use)” link, it will popup dialogue box as Figure 7, click Run, it will automatically download player and install. Figure 7 After install the plug-ins, click “Mode 1 to view” link in Figure 6 to view the video (video as Figure 8).
iBaby Monitor User Manual Figure 8 1) Main Menu The main menu includes the function setting of different submenu 2) Status Displaying Area In right up corner, it is the status displaying area, to show the 9 devices’ status: if not connected, button is gray if connected, button is green If wrong connected , button is yellow If alarm , button is red 3) Multi Channel displaying area If users add multi channel(refer to 5.3.2), when shift to 4-Ch, 9-CH, and it will automatically show other devices.
iBaby Monitor User Manual Figure 9 4) PT and video control In Pan/Tilt control area, user can control the position according to the arrow sign: up, down, left, right, middle, horizontal cruise, vertical cruise, and stop etc. Means open IO output and Close IO output. User can also set the device frame rate、resolution, brightness, contrast and other parameters.
iBaby Monitor User Manual 4 Visit Camera over Internet 4.1 Internet connection Figure 10 4.2 Port forwarding Now most router have UPNP, and the UPNP default status is on, so you need not to do the port forwarding. Otherwise, you must do port following on the router If visit Camera over internet. Take Netgear router for example.
iBaby Monitor User Manual Figure 11 Operation Steps: 1) After login the interface of the router,choose “Port Forwarding” 2) Choose “Add custom Service” 3) Input camera port. 4) Input camera IP address,click “Apply”。(the http port and ip address should be the same as figure 5 which set by you own) Note: Different router has different settings for port-forwarding; please kindly follow your router guide to do the port-forwarding. After the port-forwarding is done, you could view the IP Camera from WAN now.
iBaby Monitor User Manual Figure 12 4.3.2 Third Party DDNS User can also use third part DDNS, such as www.3322.org. User must apply a free domain name from this website and fill the info into the below blanks (Figure 13) and save the settings. Then the domain name can be used. Figure 13 Note: Using the third party domain name, if the http port is not 80, the port number should be adding to the domain name with colon. Example: http://btest.3322.org:81. While manufacturer DDNS is no need to add PORT.
iBaby Monitor User Manual Figure 15 Note1: When the device is connected both WIFI and wired, it will firstly connect to the wired network, if it can’t connect to it, then it will change to connect to the wifi. The IP address and port is the same, either wireless or wired network. Note2: Before you do the configuration of wireless as shown above; please make sure the device is connected to the network via network cable. After settings succeed, please reboot the device and wireless function takes effect. 5.
iBaby Monitor User Manual with the equipment, if not, we would suggest you to disable this function and do the port-forwarding manually. 5.1.5 DDNS Setting Please refer to the content in 4.3. 5.1.6 MSN Setting Figure 18 User needs to apply for a MSN account for this device first, for example: test1@hotmail.com. Please put this MSN account and its password as above Figure 18. Then put your MSN account, for example: friend1@hotmail.com, into the ‘MSN Friends List. Then on your friend1@hotmail.
iBaby Monitor User Manual The user can select voice detection, triggering the alarm. The more the figure, and the more sensitive. Figure 19 2) Alarm Action All kinds of alarm modes:¾ IO interface for alarm signal output: when relay is switched on, the external alarm will begin to alarm. ¾ Send alarm info by email. ¾ Send the site pictures to the FTP server, user can also set the break time between two pictures. ¾ Send alarm info to the alarm server.
iBaby Monitor User Manual Figure 20 5.2.2 Mail Service Setting The device will send alarm email to you. You only need to fill out the blanks with your email address as shown in Figure 21. After the setting, please click save and test to check if it works properly. If it is properly set, user can tick to enable “Report Internet IP by mail”. After every restart, the device will send its Internet IP address to user’s email address.
iBaby Monitor User Manual Figure 21 5.2.3 FTP Service Setting Figure 22 When alarming, device will snap and send the image to FTP server, please make sure the FTP setting is correct. Above Figure 22 of FTP setting for your reference, after the setting is finished, click “Test” to test your settings are correct or not. After correct setting FTP server, you can use “upload Image Periodically” function. Even no alarm, device can also send the snap image to FTP periodically.
iBaby Monitor User Manual server first. And please apply some storage, and the authority to write and create sub-category into it. 5.2.4 Alarm Server Figure 23 Please confirm if you have connected to alarm server. The alarm message format as follow: GET /api/alarm.asp? username=username& userpwd=password& rea=alarm type (1=Motion Detection, 2 =Alarm from Alarm in port)& io=0 Alarm server needs developing by user. User can extend other functions on this server, like SMS, MMS alarm, and mobile phone etc.
iBaby Monitor User Manual 5.3.2 Multi Device Setting Figure 25 As Figure 25, User can maximum add 9 devices to view the device simultaneously. Click refresh button to check the device in the LAN. When click the device, will popup setting dialogue box and input the device info, as figure 26 and click save. After that, must click submit button to save. Figure 26 5.3.3 Other settings You can choose open or close indicator LED.
iBaby Monitor User Manual Figure 27 5.4 Maintain 5.4.1 Device Information Figure 28 5.4.2 Time Setting If the device is connected to the Internet, you enable the NTP server to correct the time and select the right time zone. Or you should use the PC’s time to correct its time.
iBaby Monitor User Manual 5.4.3 Firmware upgrade The device runs 2 kinds of programmer, one is system firmware, the other is application firmware. They could be upgraded separately. Figure 30 5.4.4 Restore Factory Default Click “Restore Factory Default”, it will pop up a dialogue to confirm if you really want to restore the factory default. After confirmation, the system will restore the factory default and reboot. 5.4.
iBaby Monitor User Manual Figure 32 For more information, pls. refer to the <> in CD. 7 FAQ 1) Unmatched power adapter will damage the equipment or power adapter When plug in the power adapter, please check carefully the voltage, it should be 5V adapter for this equipment. 2) Slowly browse speed This equipment adopts MJEPG compression format, it needs large network bandwidth, the narrow bandwidth will affect the browse speed.
iBaby Monitor User Manual change them on the same Network Segment before visit. Network Segment is the first three number of IP address. If the IP address of PC is 192.168.0.100, so it can only visit the equipment which IP address is between 192.168.0.1~192.168.0.255. 6) Can visit via public IP address, but can’t visit via manufacturer’s domain name Make sure the DNS setting is same as your PC, as below Figure 33, in the search tool, the DNS 1 and DNS 2 on both side should be same.
iBaby Monitor User Manual 8 FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.