Installation Instructions

1. Introduction
Thank you for purchasing our Car DVR. We are certain that our product will give you
trouble free operation while providing you with a safety feature that enhances your driving
experience. Our products, like most after-market safety enhanced devices, are designing
to assist and aid the driver, not to replace the manual function of the person operating the
vehicle. Please read through these instructions before attempting to install this product.
For the latest manual and product updates, please contact the dealer.
1.1 Features

High definition recording 4K+ FHD P25/ QHD+FHD P30/ FHD P30+FHD P30:

3” IPS screen;

140 º wide angle lens;

Emergency recording saved your footage when an impact is detected;

Supports Micro SD cards, Class 10 and above up to 32GB;

Cloud WiFi App for watching.
1.2 Package Contents
Dash camera Suction mount / 3M mount Car Charger USB Cable
1.3 Product Overview
1: LCD 2: Menu 3: UP 4: OK 5: Down
6: Mode 7: Lens 8: USB 9: AV 10: Reset
11: Power 12: TF Card Slot 13: Speaker
2. Getting Started
2.1 Inserting Memory Card
With the Car DVR turned off and the screen facing towards you insert the memory card
into the slot on the right of the camera with the text on the Micro SD card facing away
from you. Push the memory card in until a “click” is heard.
Note:
1).Do not remove or insert the memory card while the Car DVR is turned on as this may
damage the memory card or corrupt the memory cards stored data.
2).Please use a C10 or higher rated micro SD card with a maximum capacity of 32GB.
3).Please format the Micro SD card before the initial use.
4).When removing the memory card, be careful as the card may eject quickly.
To remove the memory card, ensure that the Car DVR is powered off, then push the
memory card until a click is heard and then release the card to eject.