Operation Manual

6
Thermal Printing Calculator
Keyboard and switch
SWITCH INDEX
1. OFF ON P IC+
Print Mode and Item Count
P
Printer is activated as long as calculator is
turned on.
IC+ Calculation with Item Count, print and display.
2. A 0 2 3 4 F
Decimal Point Selector
A Add mode. The decimal point is automatically
placed before the last two digits in addition and
subtraction.
0, 2, 3, 4 For multiplication and division, decimal point is
set to the result of the calculation. For addition
and subtraction, decimal point is set to all
entries.
F Floating decimal point. Automatic floating point
for decimally accurate computing.
3.

5/4

Rounding Switch
(Depending on decimal point system. If decimal point
system is in floating point mode, this switch will be
neglected.)
 Calculation in Round-down mode
5/4 Calculation in Round-off mode

Calculation in Round-up mode
4. Grand Total Switch
• Calculation without Grand Total.
GT Final results of additions and subtractions are
automatically accumulated in the GT memory
according to sign. The GT memory can be
recalled by pressing the [
GT
] key.
How to install or replace
the paper roll
Turn on the power switch.
Allow the paper holder to click into place.
Cut the edge of the paper roll straight with scissors for
proper feeding through the printer head. Insert the edge of
the paper roll into the paper slot.
Press the “Paper Feed” key
(5)
to feed in the paper until it
appears through the printer.
Install the paper roll in the paper holder.
Note:
• To remove the paper roll from the printer mechanism,
pull the paper roll forward after cutting the paper on the
paper roll side.
1
2
3
4
5