Datasheet

Broadcom 2-port 10Gb Virtual Fabric Adapter for IBM BladeCente
r
5
Supported I/O modules
Table 3 lists the I/O modules that can be used to connect to the Broadcom 2-port 10Gb Virtual Fabric
Adapter.
Table 3. I/O modules supported with the Broadcom 2-port 10Gb Virtual Fabric Adapter
I/O module Part number
pNIC mode
BNT Virtual Fabric 10Gb Switch Module 46C7191 N N Y N Y N N
Cisco Nexus 4001I Switch Module 46M6071 N N Y N Y N N
10 Gb Ethernet Pass-Thru Module for IBM BladeCenter 46M6181 N N N N N N N
BNT 6-port 10 Gb High Speed Switch Module 39Y9267 N N Y N Y N N
Brocade Converged 10GbE Switch Module 69Y1909 N N Y N Y N N
vNIC mode - Switch Independent Mode
BNT Virtual Fabric 10Gb Switch Module 46C7191 N N Y N Y N N
Cisco Nexus 4001I Switch Module 46M6071 N N Y N Y N N
10 Gb Ethernet Pass-Thru Module for IBM BladeCenter 46M6181 N N N N N N N
BNT 6-port 10 Gb High Speed Switch Module 39Y9267 N N N N N N N
Brocade Converged 10GbE Switch Module 69Y1909 N N N N N N N
The I/O module listed in Table 3 is supported in BladeCenter H and BladeCenter HT chassis only.