Datasheet

Broadcom 2-port 10Gb Virtual Fabric Adapter for IBM BladeCente
r
6
In BladeCenter H, the ports of CFFh cards are routed through the midplane to I/O bays 7, 8, 9, and 10, as
shown in Figure 3. The BladeCenter HT is similar in that the CFFh cards are also routed through the
midplane to I/O bays 7, 8, 9, and 10.
Figure 3. IBM BladeCenter H I/O topology showing the I/O paths from CFFh expansion cards
The Broadcom 2-port 10Gb Virtual Fabric Adapter requires that two I/O modules be installed in bays 7
and 9 of the BladeCenter H and HT chassis (Table 4).
Table 4. Locations of I/O modules required to connect to the expansion card
Expansion card I/O bay 7 I/O bay 8 I/O bay 9 I/O bay 10
Broadcom 2-port 10Gb Virtual Fabric
Adapter
Supported I/O
module
Not used Supported I/O
module
Not used