IBM IBM Server 8490 : User's Manual : Page 100

European Union EMC Directive conformance statement

This product is in conformity with the protection requirements of EU Council

Directive 89/336/EEC on the approximation of the laws of the Member States

relating to electromagnetic compatibility. IBM cannot accept responsibility for any

failure to satisfy the protection requirements resulting from a nonrecommended

modification of the product, including the fitting of non-IBM option cards. This

product has been tested and found to comply with the limits for Class B Information

Technology Equipment according to CISPR 22/European Standard EN 55022. The

limits for Class B equipment were derived for typical residential environments to

provide reasonable protection against interference with licensed communication

devices.

Japanese Voluntary Control Council for Interference (VCCI) statement

Power cords

For your safety, IBM provides a power cord with a grounded attachment plug to use

with this IBM product. To avoid electrical shock, always use the power cord and

plug with a properly grounded outlet.

IBM power cords used in the United States and Canada are listed by Underwriter’s

Laboratories (UL) and certified by the Canadian Standards Association (CSA).

For units intended to be operated at 115 volts: Use a UL-listed and CSA-certified

cord set consisting of a minimum 18 AWG, Type SVT or SJT, three-conductor cord,

a maximum of 15 feet in length and a parallel blade, grounding-type attachment

plug rated 15 amperes, 125 volts.

For units intended to be operated at 230 volts (U.S. use): Use a UL-listed and

CSA-certified cord set consisting of a minimum 18 AWG, Type SVT or SJT,

three-conductor cord, a maximum of 15 feet in length and a tandem blade,

grounding-type attachment plug rated 15 amperes, 250 volts.

For units intended to be operated at 230 volts (outside the U.S.): Use a cord set

with a grounding-type attachment plug. The cord set should have the appropriate

safety approvals for the country in which the equipment will be installed.

86 xSeries 206m Types 8485 and 8490: Installation Guide