IBM iLV300 Value Data/Video Projector User’s Guide
IBM iLV300 Value Data/Video Projector User’s Guide
Note: Before using this information and the product it supports, read the information in Appendix D, “Warranty information”, Appendix E, “European Union warranty information”, and Appendix F, “Notices”. First Edition (February 2003) © Copyright International Business Machines Corporation 2003. All rights reserved. US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.
Safety Before installing this product, read the Safety Information. Antes de instalar este produto, leia as Informações de Segurança. Pred instalací tohoto produktu si prectete prírucku bezpecnostních instrukcí. Læs sikkerhedsforskrifterne, før du installerer dette produkt. Ennen kuin asennat tämän tuotteen, lue turvaohjeet kohdasta Safety Information. Avant d’installer ce produit, lisez les consignes de sécurité. Vor der Installation dieses Produkts die Sicherheitshinweise lesen.
Läs säkerhetsinformationen innan du installerar den här produkten.
Contents Safety . . . . . . . . . . . . . . . iii Preface . . . . . . . . . . . . . . vii Registering your option . . . . . . . . . . viii Chapter 1. Introduction . . . . . . . 1-1 Chapter 2. Setting up the projector . . 2-1 Positioning the projector . . . . . Connecting a computer source . . . Required computer connections . Optional computer connections . Using the projector with Windows 98 Displaying a computer source image. Adjusting the image . . . . . . Projected image size . . . . . . . .
vi IBM iLV300 Value Data/Video Projector: User’s Guide
Preface The IBM® iLV300 Value Data/Video Projector can be used for both business presentations and home entertainment and is easy to connect, use, and maintain. In addition to this user’s guide, your option package contains the following: Figure 1.
Registering your option Thank you for purchasing this IBM product. Take a few moments to register your product and provide us with information that will help IBM to better serve you in the future. Your feedback is valuable to us in developing products and services that are important to you, as well as in developing better ways to communicate with you. Register your option on the http://www.ibm.com/pc/register/ IBM Web site.
Chapter 1. Introduction The IBM iLV300 Value Data/Video Projector has native SVGA 800x600 resolution and is compatible with a wide variety of computers and video devices, including: v IBM-compatible computers, including laptops. v Most standard VCRs, DVD players (progressive and interlaced), HDTV sources (1080i, 1035i, and 720P HDTV formats), TV and satellite tuners, camcorders, video games, and laser disc players. v Apple Macintosh and PowerBook computers.
1 2 3 4 Connector panel Adjustable foot Security lock Lamp housing door Figure 1-2. Back angle of projector 1 2 3 4 5 6 Monitor Computer S-video Composite video Audio USB Figure 1-3.
Chapter 2. Setting up the projector This chapter provides information on positioning the projector, connecting a computer source, using the projector with Windows® 98, and displaying and adjusting a computer source image. Note: You can use your projector with Presentation Director to plan and give presentations with confidence.
1 Top of image (10 ft high) 2 Bottom of image (1.22 ft above lens) 3 Lens center Figure 2-2. Projection angle in 4:3 default mode v This image offset is 124.7% when the projector is in 16:9 mode. This means that if you have an image 10 feet high, the bottom of the image will be 2.47 feet above the center of the lens. For additional information on 16:9 and 4:3 mode, see “Connecting a video device” on page 3-1.
2. Connect the other end to the video port on your computer, as shown in Figure 2-3 on page 2-2. If you are using a desktop computer, you will need to disconnect the monitor cable from the computer video port first. 3. Connect the black power cord to the Power connector on the side of the projector and to your electrical outlet, as shown in Figure 2-4. Note: Only use the power cord that was shipped with the projector. Figure 2-4.
Figure 2-6. Connecting the monitor cables To control your computer mouse using the projector remote control, connect the projector to the computer with a USB cable (not included), as shown in Figure 2-7. USB drivers must be installed to use the USB feature. For more information, see “Using the projector with Windows 98”. Figure 2-7.
If you are running Windows 98 and you connected the USB cable, the Add New Hardware Wizard appears again. Drivers must be installed to use the USB functionality. The Wizard launches three times: v The first time it detects a USB Composite Device. v The second time a USB Human Interface Device (for the keyboard). v The third time it detects a USB Human Interface Device (for the mouse). Displaying a computer source image To display a computer source, complete the following procedure: 1. Remove the lens cap.
Note: Avoid placing your hands near the hot exhaust vent in front of the projector. Figure 2-9. Rotating leveling foot 3. Position the projector the desired distance from the screen at a 90° angle to the screen. See Table 2-1 on page 2-7 for a listing of screen sizes and distances. 4. Adjust the zoom or focus on the projector. 1 Zoom (thick ring) 2 Focus (thin ring) Figure 2-10. Zoom and focus 5. If the image is not square, adjust the keystone using the buttons on the keypad. Figure 2-11.
Figure 2-12. Keystone buttons 6. Press the menu button (see Figure 2-13) to adjust the Contrast or Brightness in the Picture menu. See “Picture menu” on page 5-2 for help with these menu adjustments. Figure 2-13. Menu button Projected image size Table 2-1 provides details on the projected image size. Table 2-1.
2-8 IBM iLV300 Value Data/Video Projector: User’s Guide
Chapter 3. Using the projector with a video device This chapter provides information on using the Value Data/Video Projector with a video device. Connecting a video device You can connect VCRs, DVD players, camcorders, digital cameras, video games, HDTV receivers, and TV tuners to the projector. There is also an audio input. You can connect the audio directly to the projector to get sound from the onboard speaker, or you can connect it to your stereo’s receiver to get sound from your own speakers.
If you are connecting the projector to HDTV, the projector’s computer connector should be used. Keep in mind that HDTV and progressive sources can only be handled through the projector’s VGA connector. The optional component to S-video adapter does not function with progressive sources. With progressive sources, the component video connector requires the optional component to VESA adapter.
5. Plug the included audio cable into the black connector on the audio adapter. 6. Plug the other end of the audio cable into the blue Audio In connector on the projector. S-video connection If your video device uses a round, four-prong S-video connector, plug an S-video cable (included) into the S-video connector on your video device and into the S-video connector on the projector, as shown in Figure 3-3. Use the audio adapter as described in “Composite video connection” on page 3-2.
Figure 3-4. VGA connection Use the audio adapter as described in “Composite video connection” on page 3-2. Connect the power cord to the Power connector on the side of the projector and to your electrical outlet. Note: Always use the power cord that shipped with the projector. Displaying video To display the video, complete the following procedure: 1. Remove the lens cap. 2. Toggle the Power switch on the side of the projector to the On position. 3. The LED flashes green and the fans start to run.
1 Elevator foot 2 Release button Figure 3-5. Adjusting the height of the projector 2. If necessary, rotate the leveling foot located at the rear of the projector, as shown in Figure 2-9 on page 2-6. Note: Avoid placing your hands near the hot exhaust vent in front of the projector. Figure 3-6. Rotating leveling foot 3. Position the projector the desired distance from the screen at a 90° angle to the screen.
Figure 3-8. Volume buttons 7. Press the Menu button (shown in Figure 3-9) to adjust the Contrast, Brightness, Color, Tint, or Aspect Ratio in the Picture menu. See “Picture menu” on page 5-2 for help with the menus and these adjustments. For Aspect Ratio, keep in mind that DVD players must be configured for 16:9 in order to view the highest quality image. Figure 3-9.
Chapter 4. Using the projector features This chapter provides information on using the remote control, audio, keypad buttons, and other projector features. Note: You can use your projector with Presentation Director to plan and give presentations with confidence. You can ensure that your computer and display will not turn off or go blank during a presentation, be sure your graphics and text will be as crisp and clear, and save important display settings for future presentations with the same equipment.
laser 1 2 3 4 Cursor control Backlight button Mouse buttons Navigation buttons Figure 4-1. Projector remote Attention: When replacing the batteries, be aware that using batteries other than the type provided with the projector may risk severe damage to the remote. When disposing of the batteries, be sure to do so in an environmentally proper manner.
Caution To reduce the risk of injury to the eyes, do not look directly into the remote control laser light and do not point the laser light into anyone’s eyes. The remote control is equipped with a Class II laser that emits radiation. To operate the remote control, point the remote at the projection screen or at the projector (not at the computer). The range of optimum operation is about 15 feet (4.5m). To use the laser pointer, press and hold the Laser button.
PowerPoint Slide Show mode, a left click advances to the next slide and a right click returns to the previous slide (other PowerPoint modes are not affected). Troubleshooting the remote v Make sure the batteries are installed in the proper orientation and are not dead. v Make sure you are pointing the remote at the projector or the screen, not the computer, and are within the remote range of 15 feet (4.5m). For best results, point the remote at the screen.
v Adjust the audio source. v If playing a video, make sure the playback has not been paused. Using the keypad buttons Following is an overview of the keypad button functions. Figure 4-4. Keypad buttons v Menu– Opens the on-screen menus (see Chapter 5, “Using the menus”, on page 5-1). v Select– Confirms choices made in the menus (see Chapter 5, “Using the menus”, on page 5-1). v Up and Down arrows– Navigates to and adjusts settings in the menus (see Chapter 5, “Using the menus”, on page 5-1).
Presentation features The following are presentation features provided. For more information, see Chapter 5, “Using the menus”, on page 5-1. v The Effect button on the remote allows you to assign various features to the button. The default effect is About, which displays information about the projector and current source. You can select among Blank, Mute, Aspect Ratio, Source, Auto Image, Freeze, Zoom, and About. For more information, see “Settings menu” on page 5-5.
v v v v Turn on power saving features. Specify blank screen colors and start up logos. Specify the language viewed on the menus. Save settings for the active source as a preset. Shutting down the projector The projector automatically displays a black screen after no active source is detected for 30 minutes. This black screen helps preserve the life of the projector. The image returns when an active source is detected or a remote or keypad button is pressed.
4-8 IBM iLV300 Value Data/Video Projector: User’s Guide
Chapter 5. Using the menus To open the menus, press the Menu button on the keypad or remote. (The menus automatically close after 60 seconds if no buttons are pressed.) The Main menu appears, as shown in Figure 5-1. Figure 5-1. Main menu Use the arrow buttons to move up and down to highlight the desired submenu, then press the Select button. Figure 5-2.
Picture menu You can adjust the image through the Picture menu, shown in Figure 5-3. Figure 5-3. Picture menu Following is a list of the picture options available through the Picture menu: v Keystone: Adjusts the image vertically and makes a squarer image, as shown in Figure 5-4 and Figure 5-5. You can also adjust the keystone from the keypad. Figure 5-4. Increasing keystone Figure 5-5.
Figure 5-6. Aspect Ratio menu For more information regarding Aspect Ratio, see “Connecting a video device” on page 3-1 and “Picture menu” on page 5-2. v Presets: Presets are provided that optimize the projector for displaying computer presentations, photographs, film images, and video images. Film input is material originally captured on a film camera, like a movie; video input is material originally captured on a video camera, like a TV show or sporting event.
v Color Temperature: Changes the intensity of the colors. Select a relative warmth value from the Color Temperature menu, shown in Figure 5-9. Figure 5-9. Color Temperature menu v Color Control: Enables you to individually adjust the gain for the red, green, and blue colors, as shown in Figure 5-10. Figure 5-10. Color Control menu v Video Standard: When the video standard is set to Auto, the projector attempts to automatically pick the video standard based on the input signal it receives.
Settings menu The Settings menu provides set-up type adjustments that are not changed often. Following is a list of the setting options: v Audio: Enables you to adjust the volume of the internal speaker. Adjustments can also be made from the projector keypad and the remote. The Audio menu is shown in Figure 5-12. Figure 5-12. Audio menu v Sources: Power-up Source determines which source the projector checks first for active video during power-up. Figure 5-13 shows the Sources and Power-up Source menus.
– NND prevents your notebook computer from going into Screen Save mode if the USB cable is connected. – Power Save automatically turns the lamp off after no signals are detected for 20 minutes. After an additional 10 minutes with no signal, the projector powers down and can be toggled off. If an active signal is received before the projector powers down, the image will be displayed. When Power Save is enabled, Screen Save is disabled.
Figure 5-18. Effect Key menu The functions listed on the Effect Key menu are: – Blank: Displays an empty screen. – Mute: Turns off all sound. – Aspect Ratio: Toggles among 4:3, 16:9, and Native (see “Connecting a video device” on page 3-1 and “Picture menu” on page 5-2). Set as the Effect key, it can allow you to switch the Aspect Ratio for DVDs. – Source: Cycles through available sources. – Auto Image: Resets the projector to the source. For more information, see “Using the keypad buttons” on page 4-5.
Figure 5-20.
Appendix A. Maintenance This chapter provides information on projector maintenance. Cleaning the lens To clean the lens, complete the following procedure: 1. Apply a non-abrasive camera lens cleaner to a soft, dry cloth. Note: Avoid using an excessive amount of cleaner, and do not apply the cleaner directly to the lens. Abrasive cleaners, solvents or other harsh chemicals might scratch the lens. 2. Lightly wipe the cleaning cloth over the lens in a circular motion.
Attention: v To avoid burns, allow the projector to cool for at least 30 minutes before you replace the lamp. v Do not drop the lamp housing or touch the glass bulb! The glass may shatter and cause injury. v Be extremely careful when removing the lamp housing. In the unlikely event that the bulb ruptures, small glass fragments may be generated. The lamp housing is designed to contain these fragments, but use caution when removing the lamp housing.
1 2 3 4 5 Connector Locking tab Lamp housing Screws Lamp cable Figure A-2. Lamp housing parts 5. Carefully remove the lamp housing. Dispose of the lamp in an environmentally proper manner. 6. Install the new lamp housing and tighten the screws. 7. Re-attach the lamp connector to the projector. The locking tab should engage when the connector is fully plugged in. 8. Replace the lamp door. 9. Plug in the power cord and toggle the Power switch to turn the projector back on. 10.
1 Lamp 2 Screen (located on each side of lamp housing) Figure A-3. Lamp housing 2. Examine the dust filter screens on the lamp housing. If necessary, use a vacuum cleaner set on low power to clean the screens. Be careful not to disturb any internal components when cleaning the screens. 3. Replace the lamp housing and lamp door. Using the security lock The projector has a security lock for use with a PC Guardian Cable Lock System.
Appendix B. Troubleshooting The following table provides troubleshooting information for the projector. In some cases, more than one possible solution is provided. Try the solutions in the order they are presented. When the problem is solved, you can skip the additional solutions. Table B-1. Troubleshooting Problem Solution No start up screen. v Plug the power cord into the left side of the projector. v Remove the lens cap. v Toggle the power switch. Only the start up screen appears.
Table B-1. Troubleshooting (continued) Problem Solution The image does not fit in the 4:3 or 16:9 screen. Change the aspect ratio to 4:3 or 16:9 in the Picture>Aspect ratio menu. The image is upside down. Turn off ″ceiling″ in Settings>System menu. The image is reversed to the left or right. Turn off the rear in Settings>System menu. The projected colors do not match Adjust the color, tint, color temperatures, brightness, the source. and contrast in the menus.
IBM representative. Table B-3. Red LED behavior and projector errors Red LED behavior Explanation One blink The lamp will not strike after five attempts. Check the lamp and lamp door installations for loose connections. Two blinks The lamp counter hours have exceeded lamp life hours. Replace the lamp and reset the lamp hours counter. Three blinks The projector has shut down. Check to see if the lamp door is open.
B-4 IBM iLV300 Value Data/Video Projector: User’s Guide
Appendix C. Specifications Following are specifications for the IBM iLV300 Value Data/Video Projector.
C-2 IBM iLV300 Value Data/Video Projector: User’s Guide
Appendix D. Warranty information This section contains the warranty period for your product, information about obtaining warranty service and support, and the IBM Statement of Limited Warranty. Warranty period Contact your place of purchase for warranty service information.
To assist the technical support representative, have available as much of the following information as possible: v Option name v Option number v Proof of purchase v Computer manufacturer, model, serial number (if IBM), and manual v Exact wording of the error message (if any) v Description of the problem v Hardware and software configuration information for your system If possible, be at your computer. Your technical support representative might want to walk you through the problem during the call.
IBM Statement of Limited Warranty Z125-4753-06 8/2000 Part 1 - General Terms This Statement of Limited Warranty includes Part 1 - General Terms and Part 2 Country-unique Terms. The terms of Part 2 replace or modify those of Part 1. The warranties provided by IBM in this Statement of Limited Warranty apply only to Machines you purchase for your use, and not for resale, from IBM or your reseller.
During the warranty period, IBM or your reseller, if approved by IBM to provide warranty service, provides without charge certain types of repair and exchange service to keep Machines in, or restore them to, conformance with their Specifications. IBM or your reseller will inform you of the available types of service for a Machine based on its country of installation.
contract or tort claim), except for any liability that cannot be waived or limited by applicable laws, IBM is liable for no more than 1. damages for bodily injury (including death) and damage to real property and tangible personal property; and 2. the amount of any other actual direct damages, up to the charges (if recurring, 12 months’ charges apply) for the Machine that is subject of the claim. For purposes of this item, the term “Machine” includes Machine Code and Licensed Internal Code.
Governing Law: The following replaces “laws of the country in which you acquired the Machine” in the first sentence: laws of the State of New York. ASIA PACIFIC AUSTRALIA The IBM Warranty for Machines: The following paragraph is added to this Section: The warranties specified in this Section are in addition to any rights you may have under the Trade Practices Act 1974 or other similar legislation and are only limited to the extent permitted by the applicable legislation.
The English language version of this Agreement prevails over any other language version. HONG KONG AND MACAU Governing Law: The following replaces “laws of the country in which you acquired the Machine” in the first sentence: laws of Hong Kong Special Administrative Region. INDIA Limitation of Liability: The following replaces items 1 and 2 of this Section: 1.
The arbitration fee will be borne by the losing party unless otherwise determined by the arbitral award. During the course of arbitration, this Agreement will continue to be performed except for the part which the parties are disputing and which is undergoing arbitration. EUROPE, MIDDLE EAST, AFRICA (EMEA) THE FOLLOWING TERMS APPLY TO ALL EMEA COUNTRIES: The terms of this Statement of Limited Warranty apply to Machines purchased from IBM or an IBM reseller.
disputes relating to it will be submitted to the exclusive jurisdiction of the English courts; and 5) in Greece, Israel, Italy, Portugal, and Spain any legal claim arising out of this Statement will be brought before, and finally settled by, the competent court of Athens, Tel Aviv, Milan, Lisbon, and Madrid, respectively.
Extent of Warranty: The following is added to this Section: Except as expressly provided in these terms and conditions, all statutory conditions, including all warranties implied, but without prejudice to the generality of the foregoing all warranties implied by the Sale of Goods Act 1893 or the Sale of Goods and Supply of Services Act 1980 are hereby excluded. Limitation of Liability: The following replaces items one and two of the first paragraph of this Section: 1.
The following item is added to this paragraph: 3. breach of IBM’s obligations implied by Section 12 of the Sale of Goods Act 1979 or Section 2 of the Supply of Goods and Services Act 1982. Applicability of suppliers and resellers (unchanged). The following is added to the end of this Section: IBM’s entire liability and your sole remedy, whether in contract or in tort, in respect of any default shall be limited to damages. Appendix D.
D-12 IBM iLV300 Value Data/Video Projector: User’s Guide
Appendix E. European Union warranty information Consumers in the European Union have legal rights under applicable national legislation governing the sale of consumer goods. This legislation may apply to you if you purchased this product as a consumer (that is, as a natural person, and for personal use which is not related to your trade, business or profession).
hvis du har anskaffet dette produkt som forbruger, dvs. som fysisk person og til personlig brug og ikke i forbindelse med dit fag, din forretning eller din profession. For at opnå garantiservice i henhold til denne lovgivning skal du vise kvitteringen for købet af produktet til IBM og angive, at du er forbruger. Klanten in de Europese Unie hebben wettelijke rechten onder toepasselijke landelijke wetgeving die van toepassing is op de verkoop van consumptiegoederen.
Appendix F. Notices IBM may not offer the products, services, or features discussed in this document in all countries. Consult your local IBM representative for information on the products and services currently available in your area. Any reference to an IBM product, program, or service is not intended to state or imply that only that IBM product, program, or service may be used.
vary significantly. Some measurements may have been made on development-level systems and there is no guarantee that these measurements will be the same on generally available systems. Furthermore, some measurements may have been estimated through extrapolation. Actual results may vary. Users of this document should verify the applicable data for their specific environment.
International Business Machines Corporation New Orchard Road Armonk, NY 10504 Telephone: 1-919-543-2193 Tested To Comply With FCC Standards FOR HOME OR OFFICE USE Industry Canada Class B emission compliance statement This Class B digital apparatus complies with Canadian ICES-003. Avis de conformite a la reglementation d’Industrie Canada Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
This product has been tested and found to comply with the limits for Class B Information Technology Equipment according to European Standard EN 55022. The limits for Class B equipment were derived for typical residential environments to provide reasonable protection against interference with licensed communication devices.
Japanese statement of compliance for products less than or equal to 20 A per phase Appendix F.
F-6 IBM iLV300 Value Data/Video Projector: User’s Guide
Part Number: 31P9883 Printed in U.S.A.
