Laptop User Manual
Table Of Contents
- Contents
- ThinkPad s30, s31 Hardware Maintenance Manual
- Read This First
- Product Overview
- Related service information
- Checkout Guide
- Symptom-to-FRU Index
- Numeric Error Codes
- Error Messages
- No Beep Symptoms
- LCD-Related Symptoms
- Keyboard-Related Symptoms
- Indicator-Related Symptoms
- Power-Related Symptoms
- PC Card (PCMCIA)-Related Symptoms
- CompactFlash Card-Related Symptoms
- Speaker-Related Symptoms
- Power Management-Related Symptoms
- Peripheral-Device-Related Symptom
- Intermittent Problems
- Undetermined Problems
- CE Utility Program Diskette
- Running the Diagnostics
- FRU Removals and Replacements
- FRU Service Procedures
- 1010 Battery ASM
- 1020 Keyboard ASM
- 1030 Hard Disk Drive ASM
- 1035 Hard Disk Drive FPC ASM
- 1040 Suspend Board ASM
- 1045 Suspend Board Cable ASM
- 1050 Modem Card ASM
- 1055 Modem Cable ASM
- 1060 Wireless Card ASM (s30 only)
- 1065 IEEE 1394/LAN Card ASM
- 1070 IEEE 1394/LAN Card Cable ASM
- 1075 DIMM Card ASM
- 1080 Upper Cover ASM
- 1085 Speaker ASM
- 1090 Palm Rest ASM
- 1100 Fan ASM
- 1130 PCMCIA Slots
- 1140 System Board
- 1145 Power Board ASM
- 1150 LCD Bezel ASM
- 1155 LCD Rear Cover ASM
- 1160 LCD Inverter ASM
- 1170 LCD FPC ASM
- 1180 LCD Panel ASM
- 1185 Hinge ASM
- 1190 Hinge ASM (Wireless—s30 only)
- 1195 Base ASM
- Computer Parts Listing
- LCD Unit Parts Listing
- Service Tools
- Notices
- Trademarks
Related service information
This section provides information about restoring the
pre-installed software.
Restoring the pre-installed software
To restore the pre-installed software for the s30 you can
use either the Product Recovery Program or a Recovery
CD.
To restore the pre-installed software for the s31 you can
only use the Product Recovery Program.
The Product Recovery Program is in a section of the hard
disk drive (the Service Partition) that is not displayed by
Windows Explorer. Use the Recovery CD if it was provided
with the computer.
Note: The recovery process might take up to 2 hours.
To use the Product Recovery program to restore the
pre-installed software, do the following:
1. Save all files and shut down the desktop.
2. Turn off the computer.
3. Turn on the computer. Quickly press F11 when this
message is displayed on the screen: ...″To start the
Product Recovery Program, press F11″...This message
is displayed for only a few seconds.
Note: If this message does not appear, you can use a
Recovery Repair diskette to get access to the
Product Recovery program. (see “To create a
recovery repair diskette” on page 8 for
instructions of making the Recovery Repair
diskette).
4. From the list displayed on the screen, select the
operating system you want to recover.
5. Select the recovery options you want, and follow the
instructions on the screen.
Creating the service partition for the
s30 series
To create the Service Partition and install the preloaded
system from the Recovery CD, do the following;
To create the Service Partition (SP):
1. Erase all partitions on the hard-disk drive using
FDISK or a similar application.
2. Boot with the Recovery CD (and the boot diskette if
required).
ThinkPad s30, s31
7