Laptop User Manual
Table Of Contents
- Contents
- ThinkPad s30, s31 Hardware Maintenance Manual
- Read This First
- Product Overview
- Related service information
- Checkout Guide
- Symptom-to-FRU Index
- Numeric Error Codes
- Error Messages
- No Beep Symptoms
- LCD-Related Symptoms
- Keyboard-Related Symptoms
- Indicator-Related Symptoms
- Power-Related Symptoms
- PC Card (PCMCIA)-Related Symptoms
- CompactFlash Card-Related Symptoms
- Speaker-Related Symptoms
- Power Management-Related Symptoms
- Peripheral-Device-Related Symptom
- Intermittent Problems
- Undetermined Problems
- CE Utility Program Diskette
- Running the Diagnostics
- FRU Removals and Replacements
- FRU Service Procedures
- 1010 Battery ASM
- 1020 Keyboard ASM
- 1030 Hard Disk Drive ASM
- 1035 Hard Disk Drive FPC ASM
- 1040 Suspend Board ASM
- 1045 Suspend Board Cable ASM
- 1050 Modem Card ASM
- 1055 Modem Cable ASM
- 1060 Wireless Card ASM (s30 only)
- 1065 IEEE 1394/LAN Card ASM
- 1070 IEEE 1394/LAN Card Cable ASM
- 1075 DIMM Card ASM
- 1080 Upper Cover ASM
- 1085 Speaker ASM
- 1090 Palm Rest ASM
- 1100 Fan ASM
- 1130 PCMCIA Slots
- 1140 System Board
- 1145 Power Board ASM
- 1150 LCD Bezel ASM
- 1155 LCD Rear Cover ASM
- 1160 LCD Inverter ASM
- 1170 LCD FPC ASM
- 1180 LCD Panel ASM
- 1185 Hinge ASM
- 1190 Hinge ASM (Wireless—s30 only)
- 1195 Base ASM
- Computer Parts Listing
- LCD Unit Parts Listing
- Service Tools
- Notices
- Trademarks
The computer exits hibernation mode and resumes
operation when the power-on switch is pressed. When
power is turned on, the hibernation file in the boot record
on the hard disk drive is read and the system status is
restored from the hard disk drive.
The power switch must be pressed to cause the computer
to resume operation from hibernation mode.
How to Create the Hibernation Function: Do as
follows:
v Turn off the computer.
v Connect the USB diskette drive to the computer.
v Insert the hibernation utility diskette into the diskette
drive (you can create the diskette using the Diskette
Factory).
v Turn on the computer.
v Follow the instructions on the screen.
Note: If you change the memory size, you need to
recreate the hibernation file or partition. For
partition-based hibernation, use the hibernation
utility to delete the partition first before creating a
new one.
18 ThinkPad s30, s31