Laptop User Manual
Table Of Contents
- Contents
- ThinkPad s30, s31 Hardware Maintenance Manual
- Read This First
- Product Overview
- Related service information
- Checkout Guide
- Symptom-to-FRU Index
- Numeric Error Codes
- Error Messages
- No Beep Symptoms
- LCD-Related Symptoms
- Keyboard-Related Symptoms
- Indicator-Related Symptoms
- Power-Related Symptoms
- PC Card (PCMCIA)-Related Symptoms
- CompactFlash Card-Related Symptoms
- Speaker-Related Symptoms
- Power Management-Related Symptoms
- Peripheral-Device-Related Symptom
- Intermittent Problems
- Undetermined Problems
- CE Utility Program Diskette
- Running the Diagnostics
- FRU Removals and Replacements
- FRU Service Procedures
- 1010 Battery ASM
- 1020 Keyboard ASM
- 1030 Hard Disk Drive ASM
- 1035 Hard Disk Drive FPC ASM
- 1040 Suspend Board ASM
- 1045 Suspend Board Cable ASM
- 1050 Modem Card ASM
- 1055 Modem Cable ASM
- 1060 Wireless Card ASM (s30 only)
- 1065 IEEE 1394/LAN Card ASM
- 1070 IEEE 1394/LAN Card Cable ASM
- 1075 DIMM Card ASM
- 1080 Upper Cover ASM
- 1085 Speaker ASM
- 1090 Palm Rest ASM
- 1100 Fan ASM
- 1130 PCMCIA Slots
- 1140 System Board
- 1145 Power Board ASM
- 1150 LCD Bezel ASM
- 1155 LCD Rear Cover ASM
- 1160 LCD Inverter ASM
- 1170 LCD FPC ASM
- 1180 LCD Panel ASM
- 1185 Hinge ASM
- 1190 Hinge ASM (Wireless—s30 only)
- 1195 Base ASM
- Computer Parts Listing
- LCD Unit Parts Listing
- Service Tools
- Notices
- Trademarks
CE Utility Program Diskette
Writing the Serialization Information
The EEPROM on the system board contains the
Serialization Information Data— that is, a system board
serial number and a system unit serial number. When you
replace the system board, restore the Serialization
Information Data using the ThinkPad CE Utility Diskette.
The serial number label is attached to the computer.
Writing the UUID
The EEPROM on the system board contains the Universal
Unique ID (UUID)— that is, for Microsoft or Internet use.
When you replace the system board, restore the new
UUID using the ThinkPad CE Utility Diskette. The
ThinkPad Utility will automatically generate and assign the
new UUID.
Running the Diagnostics
Use either the TrackPoint or the cursor move keys to
interact with the tests.
1. Connect the external floppy disk drive to the computer.
2. Insert the PC-Doctor startup disk into the diskette drive.
3. Power-on the computer.
4. At the main menu, select the test to run.
5. Press Enter to run the test selected.
6. After starting a test, do not press any key until
prompted, then follow the instructions on the screen.
7. When the test is completed, press Esc to return to the
main menu.
8. Select Quit/Exit Diags to exit the diagnostics utility.
ThinkPad s30, s31
27