Frequently Asked Questions Table of Contents: P. 1 How do I connect my device to my WIFI Network? P. 3 Is there an option in the app to connect to WIFI? P. 5 My device connection has failed and is offline. How do I fix this? P. 6 How do I share my device? P. 6 Can I adjust my timer for different days? P. 6 Quick Guide of Using Amazon Echo to Control Smart Devices P. 11 Quick Guide of Using Google Home to Control Smart Devices P.
Frequently Asked Questions How do I connect my device to my WIFI Network? There are two types of device network distribution, default mode (quick flash) and compatible mode (slow flash) Default mode distribution network: 1 (909) 296-0087 info@goibright.com www.goibright.
Frequently Asked Questions Compatibility mode distribution network: The compatibility mode is one step longer than the default mode. Repeat step 3 again until the indicator light flashes slowly. 2 (909) 296-0087 info@goibright.com www.goibright.
Frequently Asked Questions Device network distribution method (resetting method): 1. The device automatically enters the quick flash status after it is powered on for the first time. If the device has an indicator light, the light flashes; if the device has no indicator lights, such as bulbs, it flashes itself. If the device does not flash quickly, you are advised to log in the app and click " " in the top right corner, select the corresponding device type, and click to enter "Add Device" page.
Frequently Asked Questions - Please refer to the operation instructions at the top of the "Confirm indicator rapidly blink" button about "Help" 4 (909) 296-0087 info@goibright.com www.goibright.
Frequently Asked Questions 2. AP Mode Click the “AP Mode” in the upper right corner. After the indicator light flashes slowly, click the confirmation button on the page to connect to a 2.4G network. Then click "Go connect" to connect to the hotspot of the device “SmartLife_XXXX”. My device connection has failed and is offline. How do I fix this? Please Note when adding a device: Confirm device is powered on. Confirm the device is under config mode.
Frequently Asked Questions 10. Make sure that the router has the DHCP service enabled. If it is not enabled, the address will be occupied. 11. If it still doesn't work, it may be that the router is not compatible with the device. It is recommended that you replace the router and try again. How do I share my device? 1. You can enter the single device control page in the app, click ". . .
Frequently Asked Questions 2. Add devices in Smart Life app (Refer to App Instruction) You can skip this part if you've already added some smart devices to your Smart Life account, and in the meantime name the devices' so they can be easily recognized by you. 2.1 Download app (Refer to App Instruction) You can also search your app in either App Store or Google Play to install the app. 2.
Frequently Asked Questions 5. Tap the hamburger menu (3-line menu bar) on the top left corner, select "Add Device", Select Amazon Echo in the Set-up page 6. Select the type of your Echo, then tap "CONTINUE ". 8 (909) 296-0087 info@goibright.com www.goibright.
Frequently Asked Questions 7. Tap and hold the dot button on the top of your Echo device until the orange light shows up, then tap "CONTINUE". Make your mobile phone connected to the hot spot of echo, then tap "CONTINUE". 8. Select a Wi-Fi network to let Echo have the access to the internet. Type in the Wi-Fi password, then tap "CONNECT". Echo may take several minutes to connect the network. 9 (909) 296-0087 info@goibright.com www.goibright.
Frequently Asked Questions 9. Tap "CONTINUE" when Echo is connected to the network. After an introduction video, tap "NEXT" to finish the setup. At this point, the Echo configuration process ends. 3.2 Link the account of app to Alexa Tap "Skills & Games" in the hamburger menu, search your skill, and then click "enable" to enable the Skill. 4. Control your smart devices through Echo 4.1 Discover devices Echo needs to discover your smart devices before it controls them.
Frequently Asked Questions Note: every time you change the device's name on the app, Echo must rediscover before you control them. 4.2 Control devices by voice commands Now you can control your smart devices through Echo. You can use the following commands to control your devices (e.g., bedroom light): Alexa, turn on/off bedroom light. Alexa, set bedroom light to 50 percent. Alexa, brighten/dim bedroom light. Alexa, set bedroom light to green. Alexa, set bedroom light to warm white.
Frequently Asked Questions 2. Add devices in Smart Life app (Refer to App Instruction) You can skip this part if you've already added some smart devices to your Smart Life account, and in the meantime name the devices' so they can be easily recognized by you. 2.1 Download Smart Life app (Refer to App Instruction) You can scan the QR code below to download the Smart Life app: You can also search "Smart Life" in either App Store or Google Play to install the app.
Frequently Asked Questions 5. Help improve Google Home and click “YES, I’M IN” in the lower right corner. 6. Choose a location for Google Home, for example, choose “bedroom”. 7. Choose your WI-FI network to set up your Google Home. 13 (909) 296-0087 info@goibright.com www.goibright.
Frequently Asked Questions 8. After successfully connected, the APP page will display as follows. 9. Select a language, then click” Next”. 10. Waiting for the system to set up your Google Assistant automatically, click “Next”. 14 (909) 296-0087 info@goibright.com www.goibright.
Frequently Asked Questions 11. Click "VIEW MORE" to pop up a dialog box, and then click "I AGREE" to allow Google Home to get your calendar, flight itinerary, and more to provide personalized customization. Then set your geographic location, select the music service you need, and click on “NEXT”. If you don’t need it, you can click “Not Now” to skip. 12. Then comes a review of what you have done. After clicking “Next” the page will display “Google Home is ready”.
Frequently Asked Questions 13. This step is the voice control tutorial, click “FINISH SET UP”. Then the speaker that have been connected successfully will display in the "Home" page. 3.2 Link Smart Life account in Home Control ATTENTION: Due to the Google Home app’s known bug, you could only use one Google account to control "Home Control Action". If you sign in Google Home app with several Google accounts, only the first Google account you signed in can be used for "Home Control". 1.
Frequently Asked Questions 2. Find "Smart Life " in the list. In the new window, select your Smart Life account’s region, type your Smart Life account and password, then tap “Link Now”. After you assign rooms for devices, your devices will be listed in the Home Control page. 4. Control your smart devices through Google Home Now you can control your smart devices through Google Home. Take bedroom light as the example, the supported voice commands are as below: Ok Google, turn on/off bedroom light.
Frequently Asked Questions (or another network). No matter whether the device is online or not, the app can control the device once both of them run on the same LAN (the device and app are connected to the same WIFI router in your house). So, you are advised to turn off WIFI of your mobile and turn on cellular data, then refresh the device list to see whether the device is still online. 3. If the device is offline, check whether your WIFI works normally. If no, troubleshoot the router. 4.
