Datasheet

preliminary preliminary
iC-MZ
DIFFERENTIAL HALL SWITCH
Rev A1, Page 5/11
ELECTRICAL CHARACTERISTICS
Item Symbol Parameter Conditions Unit
No. Min. Typ. Max.
805 Rout()hi Output resistance VB = 10...36 V, V() =0.5 * VB 40 75 110 Ω
806 SR()hi Slew Rate high VB= 36 V, Cl() = 100 pF 100 250 V/µs
807 Vc()hi Free Wheel Clamp Voltage high I() = 100 mA,
VB = VCC = GND
0.5 1.3 V
808 Vs()lo Saturation Voltage low I() = 10 mA, output = lo 0.2 V
809 Vs()lo Saturation Voltage low I() = 30 mA, output = lo 0.4 V
810 Isc()lo Short circuit current low V() = 1.5 V, output = lo 35 50 70 mA
811 Isc()lo Short circuit current low V() = VB, output = low 600 mA
812 Rout()lo Output resistance VB = 10...36 V, V() = 0.5 * VB 40 75 110 Ω
813 SR()lo Slew Rate low VB = 36 V, Cl() = 100 pF 100 250 V/µs
814 Vc()lo Free Wheel Clamp Voltage low I() = -100 mA -1.3 -0.5 V
815 Ilk() Leakage Current in D, ND VB < VBoff; V() = 0...VBoff -10 10 µA
816 Ilk() Leakage Current in D, ND T > Toff; V() = 0...VB -10 10 µA
VB Voltage Monitor
901 VBon Turn-on Threshold VB 4.45 V
902 VBoff Turn-off Threshold VB 3.2 V
903 VBhys Hysteresis VPAhys = VPAon − VPAoff 100 200 mV
907 V(VPA) Voltage at VPA VB > 5 V 4.5 5 5.5 V
908 V(VPA) Voltage at VPA VB ≤ 5 V 4 5 V