Datasheet

iC-NZN
N-TYPE LASER DIODE DRIVER
Rev C1, Page 4/17
ABSOLUTE MAXIMUM RATINGS
Beyond these values damage may occur; device operation is not guaranteed.
Item Symbol Parameter Conditions Unit
No. Min. Max.
G001 VDD Voltage at VDD -0.7 6 V
G002 I(VDD) Current in VDD DC current -2 1200 mA
G003 I(CI) Current in CI V(LDA) = 0 -2 5 mA
G004 I(NERR) Current in NERR -2 20 mA
G005 I(MD) Current in MD -2 20 mA
G006 I()dig Current in EP, EN, TTL, REGE, NSLP,
AVG, CID
-2 20 mA
G007 I(LDK) Current in LDK DC current -2 1200 mA
G008 I(LDA) Current in LDA DC current -2 1200 mA
G009 I(RSI) Current in RSI -2 20 mA
G010 I(VSY) Current in VSYNC -2 50 mA
G011 I(SYN) Current in SYNC -2 50 mA
G012 I(IMON) Current in IMON -2 20 mA
G013 V()c Voltage at RSI, VSY, SYN, EP, EN,
TTL, REGE, AVG, CID, RGND, MD, CI,
IMON, RVDD, LDA, NERR, NSLP
-0.7 6 V
G014 V()h Voltage at LDK -0.7 15 V
G015 Vd() ESD Susceptibility at all pins HBM, 100 pF discharged through 1.5 kΩ 2 kV
G016 Tj Operating Junction Temperature -40 190
◦
C
G017 Ts Storage Temperature Range -40 190
◦
C
THERMAL DATA
Operating Conditions: VDD = 3...5.5 V
Item Symbol Parameter Conditions Unit
No. Min. Typ. Max.
T01 Ta Operating Ambient Temperature Range -20 85
◦
C
T02 Rthja Thermal Resistance Chip/Ambient surface mounted, thermal pad soldered to ca.
2 cm² heat sink
30 40 K/W
All voltages are referenced to ground unless otherwise stated.
All currents flowing into the device pins are positive; all currents flowing out of the device pins are negative.