Datasheet

iC-WE
3-CHANNEL 75 Ω LINE DRIVER
Rev D1, Page 3/10
All voltages are referenced to ground unless otherwise noted.
All currents into the device pins are positive; all currents out of the device pins are negative.
ABSOLUTE MAXIMUM RATINGS
Values beyond which damage may occur; device operation is not guaranteed.
Item Symbol Parameter Conditions Fig. Unit
Min. Max.
G001 VCC Supply Voltage 07V
G002 VB Driver Supply Voltage 0 32 V
G003 I(A) Output Current in A1..3 -800 800 mA
G004 I(E) Input Current in E1..3, INV, TRI, TNER -4 4 mA
G005 V(NER) Voltage at NER 32 V
G006 I(NER) Current in NER 25 mA
E001 Vd() ESD Susceptibility
at all pins
MIL-STD-883, Method 3015, HBM
100 pF discharged through 1.5 kΩ
2kV
TG1 Tj Operating Junction Temperature -40 165 °C
TG2 Ts Storage Temperature Range -40 150 °C
THERMAL DATA
Operating Conditions: VB = 4.5..30 V, VCC = 5 V ± 10 %
Item Symbol Parameter Conditions Fig. Unit
Min. Typ. Max.
T1 Ta Operating Ambient Temperature
Range
(extended range to -40 °C on request)
iC-WE SO16W
iC-WE SO20, iC-WE TSSOP20
-25
-25
125
130
°C
°C
T2 Rthja Thermal Resistance SO20
Chip to Ambient
surface mounted with ca. 2 cm
2
heat
sink at leads (see Demo Board)
35 45 K/W
T3 Rthja Thermal Resistance SO16W
Chip to Ambient
surface mounted with ca. 2 cm
2
heat
sink at leads
55 75 K/W
T4 Rthja Thermal Resistance TSSOP20
Chip to Ambient
surface mounted, thermal pad
soldered to ca. 2 cm
2
heat sink
30 40 K/W