Datasheet

iC-WJB
2.7 V LASER DIODE DRIVER
Rev E1, Page 3/12
ABSOLUTE MAXIMUM RATINGS
Beyond these values damage may occur; device operation is not guaranteed.
Item Symbol Parameter Conditions Unit
No. Min. Max.
G001 VCC Supply Voltage VCC -0.3 6.5 V
G002 VCC Reverse Voltage at VCC T < 10 s -3 V
G003 I(VCC) Current in VCC T < 10 s -500 50 mA
G004 I(CI) Current in CI -4 4 mA
G005 V(KLD) Voltage at KLD IN = lo 0 9 V
G006 I(KLD)
Current in KLD
IN = hi -4 400 mA
IN = lo -4 4 mA
G007 I(AMD) Current in AMD -6 6 mA
G008 I(IN) Current in IN -10 2 mA
G009 I(ISET) Current in ISET -2 2 mA
G010 I(CWD) Current in CWD IN = lo -2 2 mA
G011 Vd() ESD Susceptibility at CWD, CI, ISET,
IN, AMD, KLD
HBM, 100 pF discharged through 1.5kΩ 1 kV
G012 Tj Junction Temperature -40 150 °C
G013 Ts Storage Temperature -40 150 °C
THERMAL DATA
Operating Conditions: VCC = 2.7...6 V
Item Symbol Parameter Conditions Unit
No. Min. Typ. Max.
T01 Ta Operating Ambient Temperature Range
(extended temperature range on
request)
-25 90 °C
T02 Rthja Thermal Resistance Chip to Ambient surface mounted on PCB, without special
cooling
170 K/W
All voltages are referenced to ground unless otherwise stated.
All currents into the device pins are positive; all currents out of the device pins are negative.