Install guide
ENGLISH
5
version of either le is available on the INTELLINET Web site or if you’re instructed to
do so by INTELLINET Tech Support.
Device Detected / Network Type / Autoscan: The number or status of these three references
is listed just above the lower-panel window: a count of all HomePlug AV remote
devices discovered to be currently on the logical network; public or private network;
and whether Autoscan is on or o.
Device Name: Devices are listed in this column by their default name (as shown) unless
re-dened by clicking “Rename” or by highlighting the name and editing it in place.
An icon is usually displayed alongside the name, with a color distinction between
HomePlug 1.0 and Turbo devices.
Password: By default, this column is blank;
however, clicking “Enter Password” with
a device selected on the Main screen
allows you to set the password, which
is required when creating a private
network. When the Set Device Password
screen displays, the name of the selected
device appears above the “Password”
text eld. Enter the password, which
appears on the back panel of the
adapter, then click “OK.” NOTE: The
password is accepted regardless of the
font case entered, but do include any
dashes that separate the four- character
alphanumeric segments.
A conrmation box
appears if the password
was correctly entered. If
a device isn’t found on
the network, a
notication prompt will appear, along with suggested solutions.
Quality: This indicates the quality of the transmission between two devices.
Rate: This indicates the current transmission rate of the selected device.
MAC Address: This is the device’s MAC address.
PL65000
001
00120E000
000
MNMD-VVRD-CSNO-
OZFX