Quick Start Guide SBC3100 SBC3100 Quick Start Guide Copyright 2000 – 2018 IC Nexus Corporation.
Quick Start Guide SBC3100 Release Notes Version Release Date Notes 1.0 2.0 May 2018 December, 2018 Initial release Review and Update Disclaimer This documentation is provided for use with IC Nexus products. No license to IC Nexus property right is granted. IC Nexus assumes no liability, provides no warranty either expressed or implied relating to the usage, or intellectual property right infringement that may result from its use.
Quick Start Guide SBC3100 Table of Contents 1. 2. 3. 4. Precautions 1.1 Safety Precautions 1.2 Write Prohibited Regions 1.3 Warrnty Overview 2.1 SBC3100 Single Board Computer Interfaces 2.2 Features and Specifications Setup 3.1 Console / Debug Port 3.2 Start Running Running Software 4.1 Android 4.
Quick Start Guide 1. Precautions 1.1 Safety Precautions SBC3100 In order to use this product safely, please take special note of the following precautions. • Read all product manuals and related documentation before using this product. Use this product correctly and safely. Follow all warnings. • If operating or extending this product in a manner not described in this manual, please do so at your own risk.
Quick Start Guide 1.3 SBC3100 Warrnty As described in the Product Warranty Policy provided with this product, the main board is covered by a one year replacement warranty starting from the time of purchase. Please note that the other included goods and software are not covered under this warranty. Some knowledge used by IC-NEXUS is provided by third parties, and IC-NEXUS makes no representation or warranty as to the accuracy of such information. 2.
Quick Start Guide 2.
Quick Start Guide SBC3100 Bottom View 2.2 Features and Specifications Features High performance 2x ARM Cortex-A72 + 4x ARM Cortex-A53 cores Dedicated hardware decoder up to 4Kx2K@60fps and encoder to 1080p@30fps Hardware 2D/3D graphics accelerator Multi-display interfaces (HDMI, eDP, DP, MIPI-DSI) Multi-camera interfaces (MIPI-DSI, USB) Rich set of peripherals (USB3.0, USB2.
Quick Start Guide SBC3100 SBC3100 Specifications SBC3100 CPU Rockchip RK3399 (2x ARM Cortex-A72 + 4x ARM Cortex-A53) OS Android / Ubuntu DDR RAM 1GB / 2GB / 4GB Flash ROM 4GB / 16GB 1x HDMI 2.0 (4Kx2K @60fps) Display Interface 1x DisplayPort 1.2 (4Kx2K @60fps) 1x eDP 1.
Quick Start Guide 3. SBC3100 Setup 3.1 Console / Debug Port CN12 can be for Linux console port or debug port. It is a TTL UART signal level (+3.3V) and connected to the RK3399 UART2.
Quick Start Guide SBC3100 Follow the steps below to connect debug port with a Windows PC: Make sure you have a USB UART cable. Note : The USB UART cable is not part p of the SBC3100 product. It has to be b purchased separately. The USB UART cable is with 4 terminals (with 4 different color cables). Connect USB UART cable to SBC3100 CN12(as shown below).
Quick Start Guide SBC3100 Warning: Do NOT connect Red terminal (VCC) to CN12 Connect USB typa A connector to PC host port The USB UART cable is based on Silicon Lab CP210X chip. You may need to download the driver if your Windows PC does not support it. Driver download link https://www.silabs.com/products/development-tools/software Run terminal emulation program (e.g. TeraTerm), and open TeraTerm COM port.
Quick Start Guide 3.2 SBC3100 Start Running The SBC3100 board allows +9V ~ +36V DC power input to CN7 DC jack or CN11 header: 2.0 mm CN7 CN11 9-36V GND Warning: CN7 and CN11 are connected together. Only one power source can be applied to either CN7 or CN11. After plug in the power, long press on SW2 to start SBC3100.
Quick Start Guide 4. Running Software 4.1 Android 4.1.
Quick Start Guide 4.1.2 SBC3100 Apkinstaller Following are the steps how to install apps from external devices using Apkinstaller.
Quick Start Guide SBC3100 4) Go to Settings → turn on the Unknow sources option. 5) Click on OK You can now using Apkinstaller to install apps you want.
Quick Start Guide 4.1.3 SBC3100 Sound Settings Go to Apps → Settings → Sound to set up sound volume.
Quick Start Guide 4.1.4 SBC3100 HDMI Resolution Settings You can use Android HDMI Resoultion to set up the idea resolution. Go to Apps → Settings → Display → HDMI → HDMI Resolution Note: In our Android system, like most of normal Android, there is the sleep mode for power manages. You can set the time out of sleep mode in Settings > Display Display > Sleep. The minimum is 15 seconds econds. When time is up, the screen reen will be dim.
Quick Start Guide 4.1.5 SBC3100 Apps m all apps. You can force-stop stop or uninstall Go to Settings → Apps to manage an app that you have installed. 4.1.6 Language & Input You ou can change the UI display language and the default input methods.
Quick Start Guide 4.1.7 SBC3100 Connect to D120 module D120 is an expansion board designed for i.MX6 and RK3399 series main boards to expand 4 x RS232/RS485/RS422 serial ports. For more information please contact us for the D120 Reference Manual. 1) Install serial port test apk (FTDID2XXDemo.apk) Contact us for the FTDID2XXDemo APK. 2) 3) Test RS232 / RS485 function: Go to UART. Setting up Port and click on OPEN.
Quick Start Guide SBC3100 and click on CONFIG. 4) Turn on any terminal program on your PC. Select the same port and setting up Baud rate to begin RS232 test. To test RS485 function, please use a jumper to select RS232 / RS485.
Quick Start Guide 4.1.8 SBC3100 Connect to H330 MIPI-LVDS bridge The H330 MIPI-LVDS bridge is a display board which support MIPI input to LVDS output signal. Connection between SBC3100 and H330 shown as below: For more detail information please contact us for the H330_Reference Manual.
Quick Start Guide 4.1.9 SBC3100 Connect to H310 HDMI Receiver H310 is one of optional module which can transfer the HDMI input signal to MIPI and Audio output. Connection between SBC3100 and H310 shown as below: HDMI Using Android default Camera apps to show the input streams.
Quick Start Guide 4.2 Ubuntu Linux 4.2.1 Linux Desktop SBC3100 Root Password: icnexus Find your Home folder, File System and external momery here. 4.2.2 Screensaver Like Android, Ubuntu also has the sleep mode. To disable the sleep mode, you can go to Settings → Screensaver Preference → Display Modes. Seclet the mode Disable Screen Saver.
Quick Start Guide 4.2.3 SBC3100 Update Manager If the Update Manager for Ubuntu appears, please close it. Do not use it to update the system. We do not offer any support that allows firmware update using system update manager. For any further informatin that we do not mention in the manual, please contact us directly.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
