Instruction Manual
CAMERE RESTART: Move the cursor to current item and then click confirm button to reboot the
camera.
BACK: Go back to previous menu.
EXIT: Log out system menu.
3.4.3.1 White Balance Setup
WB MODE : AUTO
R GAIN : 50
B GAIN : 50
BACK EXIT
Figure 3-10 White balance
Move the cursor to WHITE BALANCE MODE and then click confirm button, you can go to the submenu.
WHITE BALANCE MODE: Set white balance adjustment mode. There are several modes such as
auto, ATW, indoor, outdoor, and manual and etc. Please use the left/right button on the keyboard
or in the speed dome terminal menu to set.
R GAIN: Before you set R GAIN option, please note the mode is manual. Please use the left/right
button on the keyboard or in the speed dome terminal menu to set.
B GAIN: Before you set B GAIN option, please note the mode is manual. Please use the left/right
button on the keyboard or in the speed dome terminal menu to set.
BACK: Go back to previous menu.
EXIT: Log out system menu.
3.4.3.2 Exposure Setting
AE MODE
:AUTO
GAIN SETTING
:2
SHUTTER
:1/50
IRIS SETTING
:4
EXPOSURE COMP
:8
SLOW SHUTTER
:ON
NEXT PAGE
BACK
EXIT
AGC GAIN LIMIT :2
SLOW SHUTTER LIMIT :1/25
NOISE REDUCTION :3
3D NOISE REDUCTION :OFF
BLC :OFF
WDR SETTING
NEXT PAGE
BACK EXIT
Figure 3-11 Exposure setting
Figure 3-12 Next page
HIGH LIGHT REUDCE
:OFF
AE RECOVERY
:15M
BACK
EXIT
Figure 3-13 Next page
AE MODE: Here you can set the camera exposure mode. It includes: auto/manual/AV (iris priority)/TV
(shutter priority). Please use the left/right button on the keyboard or in the speed dome
terminal menu to set.
o Auto: The gain, iris, shutter are in auto mode.
o Manual: You need to set the gain setting, shutter, and iris setting manually.
o Iris Priority (AV): I t is for you to set the iris manuall y. Gain and s hutter are in a uto mode.
o Shutter Priority (TV): It is for you to set the shutter manually, Gain and iris are in auto
mode.
GAIN SETTING: It is to set camera gain. Please use the left/right button on the keyboard or in the
speed dome terminal menu to set.
SHUTTER: It is to set camera shutter. Please use the left/right button on the keyboard or in the
speed dome terminal menu to set.
11