Manual

143
Figure 4-114
4.10.5.5 PTZ
The pan/tilt/zoom setup includes the following items. Please select channel first. See
Figure 4-115.
 Control mode: You can select control mode from the dropdown list. There are two
options: Serial/HD-AVS. For HD-AVS series product, please select HD-AVS. The
control signal is sent to the PTZ via the coaxial cable. For the serial mode, the control
signal is sent to the PTZ via the RS485 port.
 Protocol: Please select DH-SD1 if the control mode is HD-AVS.
 Address: input corresponding PTZ address.
 Baud rate: Select baud rate.
 Data bit: Select data bit.
 Stop bit: Select stop bit.
 Parity: There are three choices: none/odd/even.
After completed all the setups please click save button, system goes back to the previous
menu.