Manual

58
4.4.1 Window Switch
System supports 1/4/8/9-window. You can select from the dropdown list. See Figure
4-11.
Figure 4-11
4.4.2 PTZ Control
The PTZ setup is shown as in See Figure 4-12.
Please note the commend name is grey once device does not support this function.
The PTZ operation is only valid in one-window mode.
Here you can control PTZ direction, speed, zoom, focus, iris, preset, tour, scan, pattern
aux function, light and wiper, rotation and etc.
Speed is to control PTZ movement speed. The value ranges from 1 to 8.The speed 8 is
faster than speed 1. You can use the remote control to click the small keyboard to set.
You can click and of the zoom, focus and iris to zoom in/out, definition and
brightness.
The PTZ rotation supports 8 directions. If you are using direction buttons on the front
panel, there are only four directions: up/down/left/right.
Figure 4-12
In the middle of the eight direction arrows, there is a 3D intelligent positioning key. See
Figure 4-13. Please make sure your protocol supports this function and you need to use
mouse to control.