Owner manual

138
Parameter
Function
Enable tour
Check the box here to enable tour function.
Interval
Here is for you to adjust transparency. The value ranges from 5 to
120s. The default setup is 5s.
Split
Here you can set window mode and channel group. System can
support 1/4-window according to device channel amount.
Motion
tour/Alarm
tour
Here you can set motion detect tour/alarm tour window mode.
System supports 1/8-window now.
7.8.5.4 Default
The default setup interface is shown as in Figure 7-80.
Here you can select Channel/Network/Event/Storage/System. Or you can check the All box to select all
items.
Figure 7-80
7.8.5.5 Import/Export
The interface is shown as in Figure 7-81.
Figure 7-81
Please refer to the following sheet for detailed information.