Manual

8
9
5. Installation 5. Installation
Caution : Connect the cable in accordance with above cable configuration.
① After undoing fixed screws on a REAR CASE on the picture 2(A), separate the REAR
CASE.
② After undoing fixed screws on an UPPER COVER on the picture 2(A), separate the
UPPER COVER.
③ After undoing socket head screws on a BRACKET on the picture 2(A), separate the
BRACKET.
④ As the picture 2(B), fix the BRACKET to upside of the unit using socket head screws.
⑤ As the picture 2(B), fix the REAR COVER to the back of the unit using fixed screws.
⑥ As the picture 2(B) adjust the angle and the direction of the unit using L-Wrench.
< Picture 3 >
< Picture 2 >
5-2. How to install to Wall
DC24V POWER(WHITE)
DC24V G N D (BLACK)
VIDEO(ORANGE)
VIDEO GND(BLACK)
RS485(BLUE)
RS485(BROWN)
HEATER AC24V(RED)
HEATER AC24V(RED)
Fixed screw - 4EA
(Ø4X30)
Socket head screw
(M3X6L-4EA)
Fixed screw
(M2.6X6L-4EA)
Fixed screw
(M3X8L-2EA)
L-Wrench
Ø2.5
Socket screw
(M3X6L-4EA)
DC24V POWER(WHITE)
DC24V G N D (BLACK)
VIDEO(ORANGE)
VIDEO GND(BLACK)
RS485(BLUE)
RS485(BROWN)
HEATER AC24V(RED)
HEATER AC24V(RED)
Fixed screw
(M3X8L-2EA)
① Cable Configuration
- White :
DC24V (GND) Camera Power (Non-Polarity)
Video
Video GND
RS485 (RX-)
RS485 (RX+)
AC24V (Heater Power)
AC24V (Heater Power)
DC24V Camera Power (Non-Polarity)
- Black :
- Orange :
- Black :
- Blue :
- Brown :
- Red :
- Red :
(A) (B)
RS485
Terminal block
(Option: Power/Heater)
BNC Female
Power (24VDC)
Zoom Control
Black: TX+ (PTZ_GND)
Red: RX-(Tele_Wide)
White: RX+ (Near_Far)
Yellow: TX-
Cable