Owner manual

100
Parameter
Function
Remote
host
PPPOE

Input the user name and password which ISP(Internet service supplier)
provided and chose enable.

Reboot system after configuration is saved and the device will auto connect
to Internet. The IP address is the WAN IP.

There are two conditions for reboot,
1. The user must have the authority to reboot device.
2. There is no user login the system menu on the local end

After PPPOE dial succeed, get the current IP address and visit this IP
address via WEB.
Email
The email interface is shown as in Figure 6-31.
Figure 6-31 Email
Please refer to the following sheet for detailed information.
Parameter Function
SMTP Server
Input server address and then enable this function.
You can also input the corresponding server domain name
here, but you need to go to DNS interface (chapter 7.3.4.1) to
set the server IP that can parse the domain.
SSL enable
You can enable SSL encryption function to guarantee data
safety.
Port Default value is 25. You can modify it if necessary.
User Name
The sender email account user name.
Password
The sender email account password.
Sender
Sender email address.