Installation Instructions

Version 1.0.0
Quick Start Guide
FLODDER
Note:
Press and hold the reset button for 10 s to reset the camera.
Camera Introduction
The pattern of the LED indicator is included in the following table.
LED Indicator Status
Green light flashing
Green light on
Red light flashing
Green and Red light
flashing alternately
Powered off/LED turned off
Rebooting after reset
Booting
Device malfunction
Waiting for network
Operating properly
Network connection failed
Off
Red light on
Firmware updating
QSG ×1
Floodlight Camera ×1 Screw Package ×1Mounting Plate×1
Mounting Screws ×1
Bracket Screws ×4 Wire Nut ×3
Assembly
Junction Box
(not included)
Mounting
Plate
Bracket
Screws
Mounting
Screws
Camera Lock Collar
Application
Hook ×1
10 Meters (33 feet)
3 Meters (10 feet)
When mounted at 3 m (10 feet) off the
ground, with the PIR lens parallel to the
ground, the motion detector is opti-
mized to detect human-sized objects at
up to 10 m (33 feet).
FloodlightFloodlight
Build-in Mic
Lens
LED Indicator
PIR Detector
Micro SD
Card Slot
Reset
Button
Built-in
Speaker
Photosensor
Packing List
Device Status