User Manual

Table Of Contents

5 Setup

5.1 Camera

5.1.1 Conditions

Here you can view device property information. Slight differences may be found due to different network

camera series. The setups become valid immediately after you set. See Figure 5-1.

Note: Only motorized zoom lens device has zoom and focus function.

Figure 5-1

Please refer to the following sheet for detailed information.

Parameter

Function

Profile

You may select normal, day and night mode.

Brightness

It is to adjust monitor window brightness. You can adjust this

value if the video is too dark or too bright. The larger the

number, the bright the video is. When you input the value here,

the bright section and the dark section of the video will be

adjusted accordingly. Please note the video may become hazy

if the value is too high.

The value ranges from 0 to 100. The recommended value

ranges from 40 to 60. The default value is 50.