User Manual

23
3D NR
This threshold is mainly for multi-frame (at least 2) image
processing. It reduces noise with info between a frame and
previous frame. The higher the value, the better NR will be.
Default is enabled. NR level ranges from 0 to 100. The
recommended value to from 40 to 60. Default value is 50.
Mirror
It is to switch video left and right limit.
This function is disabled by default.
Cancel
It is to cancel the operation in current interface and restore
previously saved operation.
Default
It is to set device default setup.
OK
Save config.
Profile management has three modes: normal, full time and schedule. If you select normal, the video will
be configured as normal as in Figure 5-2.
Figure 5-2
If you select full time, you must select either day or night, and the video will be configured accordingly
as in Figure 5-63.
Figure 5-3