User Manual

54
Figure 5-33
Different colors represent different areas. Each area can set different detection zones. Detection zone
cam be irregular and discontinuous. If device monitoring zone is large, user can sub-divide the area into
several zones for better motion detect.
Please refer to the following sheet for detailed information.
Parameter
Function
Name
Default area name includes Region0, Region1, Region2,
Region3 and custom.
Sensitivity
It is sensitivity of brightness as motion detection is more possible
to be trigger with high sensitivity. You can set up to four areas.
The range is 0~100. The recommenced value is 30~70.
Area threshold
It is to check target object area related to detection area. The
lower the area threshold, the easier to trigger motion detection.
You can set up to four areas. The range is 0~100. The
recommenced value is 0~10.
Waveform
Red means motion detect is triggered. Green means motion
detect is not triggered.