User Manual

55
Delete all
Clear all areas.
Delete
Delete selected area.
5.3.1.2 Video Masking
The video masking interface is shown as in Figure 5-34.
Figure 5-34
Please refer to the following sheet for detailed information.
Parameter
Function
Enable
You need to check the box to enable this function.
Working
period
You need to set arm and disarm time. Click on setup button to set.
Record
After record is enabled, video masking can activate video.
Record delay
System can delay the record for specified time after alarm ended.
The value ranges from 10s to 300s.
Relay out
Enable alarm activation function. You need to select alarm output
port so that system can activate corresponding alarm device when
alarm occurs.
Alarm delay
System can delay the alarm output for specified time after alarm
ended. The value ranges from 10s to 300s.
Send Email
If you enabled this function, System can send out email to alert
you when alarm occurs.
Snapshot
After snapshot is enabled and alarm happens, the system will
automatically snapshot and alarm.